Ok I finally went to the dyno, so much for sleeper after posting these:

these were the first two runs at 6psi so the motor was fairly cool, the best numbers I've ever seen at such low boost



the next two runs I did were at 9-9.5 psi, I added some fuel after the first pull to get it under 12:1


.....so after adding fuel to run 9-9.5 psi I did this pull at 7.5-8 and the AFR's were rich, around 11ish



so after pulling a little fuel between runs I ended up with this graph and a better AFR, but at this point, after 7 pulls, I'm sure heat soak was taking it's toll even though the numbers were better.



It's suprising what the diffrence between 6psi and 10psi feels like for only being 33 whp and 32 WTQ.