Through an interesting set of events, the great opportunity to design and prototype this kit came up. Needless to say I didn't turn it down.

I should start fabbing/fine tuning the prototype piping over the next couple of weeks to work with the parts we're going to use. The bad thing is I'll be boostless waiting on production prototype parts to get back to me for fittment checks. If they're good they're be some testing and tuning, a little this, a little that, a final approval stamp, a production run, and it'll be on the market. <-----short version

The kit is going to run a Turbonetics T3/T4 5 bolt turbo, Turbonetics Evolution wastegate, most likely an HKS SSQ blow off valve, maybe a Turbonetics Raptor BOV, cast manifold, polished mandrel bent 2.5" aluminum intercooler piping, A Treadstone TR8 intercooler (Core Size, 7.8" X 22" X 3.5", 28" overall), 2.5" polished stainless recirced downpipe, larger injectors and, an SAFC for tuning. We're aming for 8PSI, which will be about 270-280ish WHP and 260-270ish WTQ. The price, don't know yet, but around $3000 +/-.

On a side note fitting the kit up to a 2.5 Altima would only require a redesigned IC piping and downpipe. If there is enough interest I might push to get an Altima kit on the market after the Spec kit comes out.