sentra spec v

[N/A EK]

www.TheVboard.com

I was doing some research on turbo kits, and I thought this might be helpful for others as well. Maybe become a sticky??

I apologize for any info that are incorrect or missing. Please feel free to pm me if you have any updates or any info that I have missed. Also, sorry for not asking any of you for permission to put your cars on here. If you want me to take you off this thread, please feel free to pm me. Also, if you are not on this thread, and would like to be, pm me too.



Forced Induction Racing
www.fi-r.com

pics:
Dions’s car aka chillboy



Mike's auto se-r


Norlandt's car


videos:
http://gallery.thevboard.com/users/Trav4011/videos/specvdyno1.mpeg
http://www.fi-r.com/images/Dionscarpreview.WMV
http://www.fi-r.com/images/Dionscardriving1.WMV
http://www.fi-r.com/images/Dionscardriving2.WMV
http://gallery.thevboard.com/users/Trav4011/videos/norlandt%20turbo%20sentra%20-%20hybrid%20dyno.WMV
http://gallery.thevboard.com/users/SnowMan/Videos/Norlandt1.wmv

dyno charts:
Norlandt’s car aka cubanprince1


Mike’c car aka mcw75


cost:
Standard - $3595
Standard w/ Internals - $7825
Starter (shipped) - $2395
Entry Level (shipped) - $2995

parts:
Standar Kit:
Precision Turbo/Garrett T3/T04B Hybrid
Tial 38mm wastegate(preset at 6.5psi, can be raised to 8psi safely)
Spearco Front mount intercooler
38lb MSD injectors (flow balanced)
Injector clips
HKS Standard blow off valve
Mandrel bent TIG welded and bead rolled Intercooler piping kit
3" inlet pipe with hose barbs for BOV recirculation and crankcase vent
TIG welded Turbo manifold
2.5" downpipe with flex section
Dump tube from wastegate (recirculated into the downpipe)
Apexi Super AFC
Fuel pressure regulator
Fuel return line and fittings
Fuel pump modification instructions and parts
Fuel pressure guage (for under hood)
Autometer boost guage
Guage mounting pods
Silicone hose connectors (for intercooler piping)
Gaskets for turbo/manifold
Cone air filter
Clamps for intercooler piping
Install instructions
Oil feed/drain lines

Stater kit:
T3/T04B turbo with ported exhaust housing
FI-R turbo manifold
FI-R 2.5" alluminized downpipe (TIG welded with flex section)
2.5" ALLUMINUM mandrel bent intercooler piping kit
3" ALLUMINUM inlet pipe with bungs for BOV recirculation and crank vent
Gaskets for turbo and oil drain
T3 oil drain flange
Oil feed and drain lines
All fittings needed (including BSPT to NPT adaptor for oil sending unit)
38mm external wastegate with 4.5-5psi spring
Polished cone air filter
Silicone hose connectors and reducers
High-TQ clamps for piping
Spearco bar and plate intercooler

Entry Level Kit:
T3/T04B turbo with ported exhaust housing
FI-R turbo manifold
FI-R 2.5" alluminized downpipe (TIG welded with flex section)
2.5" ALLUMINUM mandrel bent intercooler piping kit
3" ALLUMINUM inlet pipe with bungs for BOV recirculation and crank vent
Gaskets for turbo and oil drain
T3 oil drain flange
Oil feed and drain lines
All fittings needed (including BSPT to NPT adaptor for oil sending unit)
38mm external wastegate with 4.5-5psi spring
Polished cone air filter
Silicone hose connectors and reducers
High-TQ clamps for piping and fuel lines
Goodyear fuel injection hose and return line
Fittings and clamps for fuel lines
Fuel pressure guage for under hood
Apexi SAFC II
PTI Fuel pressure regulator
Spearco bar and plate intercooler
Bosch recirculation valve (Blow off valve)
Recirculation valve hose and clamps


options:
Piston and rod combo (4mm longer rods and higher wrist pin)- 1550.00
Camshafts - 595.00
Engine sleeving - 1295.00
Head and main stud kit- 395.00
Valvesprings- 295.00



Power Tech Imports turbo kit
www.powertechimports.com

pics:
Kav’s car


video:
http://gallery.thevboard.com/users/KAV/PTI/100_0036.AVI

dyno chart:


cost
Stage 1 - $3395
Stage 2 - $3895
Stage 3 - $4790

parts:
(Stage 2)
T28/T3 turbo (PTI TRIM)
oil feed and return lines and all flanges and bolts
Greddy oil adapter (pre tapped for 1/8” NPT)
water feed and return lines, clamps, and adapters for upper and lower rad hose
Coated 2.5” J-tube, gaskets and bolts
3” mid pipe w/ flex tube (can custom order 2.5”)
Coated Protech hi-velocity manifold
Tial 38mm wastegate with .4 bar spring (5.88psi) and recirculation pipe
Garrett intercooler (385HP)
All aluminum intercooler piping w/BOV flange
* (choice of silver or black powder coating)
All silicone couplers and T-bolt clamps
* (choice of silver, black, red or blue couplers)
Bosch BOV with recirculation hose
3” aluminum turbo inlet pipe w/hose adapters, MAF adapter and true K&N filter
Billet fuel rail with fittings w/ guage adapter
370cc Delphi injectors (flow balanced)
Injector harness w/heat shrink and solder
5/16” Goodyear fuel line, and all clamps
Billet fuel filter
Bosch 1 to 1 ratio Fuel pres regulator
COMPLETE drop in fuel tank canister with Walbro 255lph pump
* (drop in and no mods necessary)
Autometer Boost guage and mounting cup
Full instructions and full color pictures

options:
Stage 1; no fuel delivery system included with turbo kit
Stage 3; full 3” cat back system (choice of Magnaflow muffler) with test pipe, PTI water injection, Autometer EGT and Oil pressure and 3 guage pillar pod color matched.
hi flow bolt in cat - $125



Accelerated Auto Sports (A.A.I.) turbo kit
www.acceleratedautosports.com

pics
SER Spec-Turbo's car


video:
*no info*

dyno chart:


cost:
*no info*

parts:
Turbonetics T3/T4E Turbocharger
A.A.I. 321 Polished Stainless Steel Turbo Manifold
Turbonetics Evolution Wastegate
A.A.I. Ceramic Coated Wastegate Dump Tube
(Dumps to Atmosphere)
Turbonetics Raptor Blow Off Valve
A.A.I. Blow Off Valve Recirculation System
K&N X-Stream Conical Air Filter
A.A.I. Air Filter Adapter
A.A.I. Air-Air Intercooler
(Vertical Charge, 1000 h.p. Capable)
A.A.I. Ceramic Coated Downpipe
A.A.I. Powder Coated Intercooler Tubing
A.A.I Powder Coated Inlet Tube
Turbonetics Silicone Tubing Connectors
Stainless Steel Clamps
A.A.I. Oil Feed System
A.A.I. Oil Drain System
Stainless Steel Hardware
Silicone Vacuum Hose
Valve Cover Breather Hose
Fuel Management System (Subject to Change)
Complete Installation Instructions
1 Year Warranty on Turbonetics Components
(Warranted By Turbonetics)
3 Year Warranty on A.A.I. Compoonents
(Against Defects and Cracking)

options:
Intercooler tubing, inlet tube and downpipe are available in Polished Stainless Steel for an additional $150.00
A Ceramic Ball Bearing Turbocharger Upgrade is available for an additional $475.
A Ceramic Coated Turbine Housing is available for an additional $125.
Our 3" Stainless Steel Cat-Back Exhaust System will be ready for production soon. Pricing will be approximately $499.00



Advanced Engine Breathing System (AEBS) turbo kit
www.aebsracing.com

pics:
Rod aka RedRumSpecV



video:
*no info*

dyno chart:
*no info*

cost
*no info*

parts
*no info*



Dream Workes Racing turbo kit
www.dreamworkesracing.com

pics:


video:
*no info*

dyno charts:
*no info*

cost
$4300.00 MSRP

parts:
Garret T3 Turbo
Cast SG iron exhaust manifold
Built in waste-gate,
High flow cat-back exhaust,
Stainless steel exhaust manifold heat shield,
Fifth fuel injector,
Fuel pressure regulator,
Air to air intercooler
Stainless steel intercooler pipes
All plumbing, all required hardware
Stainless steel braided Teflon water and oil hoses,
Pre-programmed fuel management system that interfaces with 2.5 L engine control module.
Dream Workes SST systems have a 3 year / 36,000 mile limited power-train warranty.
50 state emissions legal with standard boost. (7-8ps
Boost Capabilities up to 12 PSI with internal engine modifications.



Johnston Research & Performance turbo kit
www.jrponline.com

pics:


video:
www.jrponline.com/gallery/projects/specv/dyno01.wmv

dyno chart:
*no info*

cost:
*no info*

parts:
*no info*



Factor-X Engineering turbo kit
www.factorxengineering.com

pics:


video:
*no info*

dyno chart:
*no info*

cost:
*no info*

parts:
*no info*