My car idles from 1k-2k when warm and idle.

[allmotoronly]

check the fast idle thermal valve.its on the bottom of the thottle body. take the plate off the side and screw the round plastic piece all the way in, then 1/4 turn out.

[loSiRcity]

checking the fast idle valve is definetley good suggestion. where i work we get cars coming in all the time in limp mode (reving up and down between 1 and 2 k). just take one screw off the top and loosen the other and swing the cover out of the way. then get a flat head and put it in the slot and turn it clock wise (do not over tighten it) that platic peice inside just loosens up overtime

[Killer]

checking the fast idle valve is definetley good suggestion. where i work we get cars coming in all the time in limp mode (reving up and down between 1 and 2 k). just take one screw off the top and loosen the other and swing the cover out of the way. then get a flat head and put it in the slot and turn it clock wise (do not over tighten it) that platic peice inside just loosens up overtime

exactly what i did.. my car idles beatuifully....

what happens if you over tighten though?????

[loSiRcity]

i've just seen people do the hulk turn of a screw driver and brake so much stuff so i figure if i tell u dont over tighten it u'll be more careful about it. i havent broken one and i dont know of ne one who has i'd just hate for someone to brake something like and have to go spend money on what could have been a simple/free fix.