the car sould be put in TDC at the crank and the cams. there are arrows that point up on the camshaft gears, and also lines on the side to line them up with. also at the crank make sure the points line up.

also are you getting fuel, hear the fuek pump turn on?

also is it OBD1 or OBD2 if its OBD2 the crankshaft position sensor is located on the oil pump, you have to have the right timing gear for it.

in my F20b swap i did in my prelude, i had to change it from OBD1 to OBD2, and i swapped oil pumps and sensor, but didnt use the OBD2 timing gear, and the car would act like it wanted to start, and acctually would start maybe once every 10 times and just die out.