i took out my whole ac , my heater does not work , fuses are good , if the ac is gone will that effect the heater from workin? , where do i start trouble shootin ? this no heat issuse is freeeeeeeeeeezin my balls off!
i took out my whole ac , my heater does not work , fuses are good , if the ac is gone will that effect the heater from workin? , where do i start trouble shootin ? this no heat issuse is freeeeeeeeeeezin my balls off!
dnwp
b4 work bump! someone please help , it is soooooooooo f'n cold!
dnwp
does it blow any air at all?
having ac and having heat are basically not related, the question is does it blow anything at all ^^
mines blow but no heat at all either.
ok if it blow air with the ac on but it's not cold you need free-on(sp?) if it blows air but is not hot with heater on, maybe heater coil? also if it doesn't blow it could be the heater coil aslo, and/or a fan hung up..not sure..maybe even possible for a relayburnt up![]()
You know better; next time will be a ban.
no air at all! i can put it on full blast and get nothin , not even any noise
dnwp
then your blower motor is not coming on, check the blower motor fuse(s), supply power and ground to the motor to see if the motor's any good, and go from thereOriginally Posted by drunk.scotsm
must likely is your air blower
lol your car sucs so bad it won't even blow..lol j/k
You know better; next time will be a ban.
![]()
![]()
^^^^ ha ha ha you a fun guy , lol! you so funny! i am gonna take out the heater motor tomorrow , any way i can its bad when its out?
dnwp
^^ ummm..english please?
You know better; next time will be a ban.
shit , my bad , lol , when i take the htr motor out , is there any way i can tell if it is bad , just by lookin at it?
dnwp
not rly anything besides really really blunt and obvious stuff..the only way to really tell would be to start diss-assembling the motor
You know better; next time will be a ban.
it has 2 wires going to it, ground one and put 12 volts on the other, if the thing spins then the motor's not your problem
^^ good point...if it works after trying that then it is some where in the wiring possibly being a relay or something else as previsously stated
You know better; next time will be a ban.