I have a 96 accord w/ a H22A in it. Will an exhaust for an accord fit up to the H22 header?? What's the redline for this engine anyways? If I replace the engine mounts should they be for an accord or a prelude?
Accord w/ H22 Questions
I have a 96 accord w/ a H22A in it. Will an exhaust for an accord fit up to the H22 header?? What's the redline for this engine anyways? If I replace the engine mounts should they be for an accord or a prelude?
depends on the year of the car, I believe the CB7 accord exhuast will bolt up to the h22 downpipe. redline is usually around 7200 i believe.
auto or manual?
You know better; next time will be a ban.
8200 rpm
i gtot a prelude shit redlines just before 7500
ill get a pic in a sec
NIKON D90 | Sigma 10-20mm | 18-105mm | 50mm 1.8 | SB-600 speedlightNIKON Squad
Just end your life...
You know better; next time will be a ban.
see
NIKON D90 | Sigma 10-20mm | 18-105mm | 50mm 1.8 | SB-600 speedlightNIKON Squad
that's at almost 6k exactly...not redline...
You know better; next time will be a ban.
the prelude redline is 7500, the prelude header will not bolt up to accord exhaust 3 bolt to a 2 bolt.
About to approach beast mode
yeah i know this its the only pic i have of the tach and it shows were they redline at! but hey it was in V-TEEEECCCCCC!!HAHAHOriginally Posted by §treet_§peed
that's at almost 6k exactly...not redline...
NIKON D90 | Sigma 10-20mm | 18-105mm | 50mm 1.8 | SB-600 speedlightNIKON Squad
eh...
You know better; next time will be a ban.
AHAH thats what i say about it
NIKON D90 | Sigma 10-20mm | 18-105mm | 50mm 1.8 | SB-600 speedlightNIKON Squad
hey u got any pics of ur h22 swap? i need to see where ppl ran the power steering because mines keep rubbing on my hood and theres a a chunk of the medal missing
lol his is not a swap..his car came with that motor
You know better; next time will be a ban.
hahah was he talkin to me? i dont know i dont think so...fuck who knows?
NIKON D90 | Sigma 10-20mm | 18-105mm | 50mm 1.8 | SB-600 speedlightNIKON Squad
i'm pretty sure it did...DOCH V-ATTACK right? ane you said wht year sh lude?
You know better; next time will be a ban.
it's a manual... So what's the deal cause I've heard 8200 before and this guy with 7500. It is a JDM H22A btw.
I'll try to get some pics of it. I know i've noticed that somebody shaved some metal off of the pump.
So do i need a custom exhaust If I want an exhaust on there??
you shouldnt need a custom exhaust..just search for one on ebay that goes with your motor... but as you can see, there a three of them...
H22A 2.2 16V DOHC VTEC PGM-FI 2157 220hp@7200rpm 163tq@6500rpm '97-'01 Prelude SiR (JDM)
H22A 2.2 16V DOHC VTEC PGM-FI 2157 200hp@7000rpm 156tq@5250rpm '99-'01 Prelude (USA)
H22A 2.2 16V DOHC VTEC PGM-FI 2157 200hp@7200rpm 163tq@6500rpm '97-'01 Prelude Type-S (JDM)
You know better; next time will be a ban.
Actually it's an OBD I engine so no it's none of those. So are you trying to say to get an exhaust for a Prelude? is the fitment the same or does it have to be modified?
just take the exhaust you buy to a muffler shop and have them weld in the correct peice you need. About the redline 7500 is keeping it safe if you start reving your internal stock motor past this you will be ending your motors life early.
About to approach beast mode
Posting Permissions
Reply With Quote
