me and a buddy of mine have been working on his ls/vtec build. we are using a type r tranny, the starter and the half shaft that we have from the ls dont fit. is the starter and half shaft different for the type r then whats used on the ls???
need help!!!!
me and a buddy of mine have been working on his ls/vtec build. we are using a type r tranny, the starter and the half shaft that we have from the ls dont fit. is the starter and half shaft different for the type r then whats used on the ls???
posted by 01dc2 jdm
its just a vtack engine.
sure is....
You know better; next time will be a ban.
Halfshaft might be from an AUTOMATIC, then the bolt pattern is different.
If it wont slide in the tranny, then if hes using a HYDRO tranny with a CABLE TRANNY halfshaft, you MUST switch the AXLE seals out. IE
Hydro Tranny with HYDRO Halfshaft
Hydro Tranny with Cable Halfshaft and Cable Tranny axle seals
Cable Tranny with Hydro Halfshaft and Hydro Axle seals
if you dont have the right combo, then the shaft will only slide in with about .5in left an you wont be able to get it in an bolt it to the block
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
thanks
posted by 01dc2 jdm
its just a vtack engine.
if u have a type r tranny use type r tranny parts it is that simple
not necessary,Originally Posted by harper22
i just learned somthing new today
,
_ernie
Posting Permissions
Reply With Quote