what kind of intake pipe do you have steel or aluminum? all you need to do is pick a place on your intake to mount the b.o.v mark a spot and and cut a hole,lay the flange for the b.o.v (i hope you have one) and weld the flange in place.then you will put the rubber o ring into the flange and install b.o.v and then the C clip,it helps to have the tool to put it in.then run you vacume line to the engine,pretty much any where you can T into the line.a plastic T will work fine.dont foget the little ssq filter that goes in line to the vacume on the engine. if you cant weld ive seen people use jb weld,i welded mine. all this will work for you,unless you car came with a turbo and b.o.v.then you will need to buy a flange for your car.
Reply With Quote