Results 1 to 12 of 12

Thread: NO BOOST! HELP!

  1. #1
    haters gonna hate Retro's Avatar
    Join Date
    Oct 2005
    Location
    Conyers
    Age
    37
    Posts
    1,378
    Rep Power
    22

    Default NO BOOST! HELP!

    Whats up guys, i just recently finished my turbo install and im having a few problems, its a 91 si hatch with a jdm zc swap....garrett t3/t4 .60 trim, xs power manifold, turbonetics deltagate mark 2, starion fmic, turbo xs boost controller, blox missing link, fake greddy bov, custom pipes, custom downpipe. when i first put it on the down pipe what about 6" long, before i took it to the exhaust shop, the turbo was spooling to about 8 or 10 psi...thne it would sppol to about 5 or 6psi. after i took it to get the exhaust done, i put the o2 sensor back in. now the turbo will only spool to 2 maybe 3 psi, ive pretty much ruled out leaking intercooler pipes and bad wastegate. im not sure what the problem is...not enough compression?(the car ran strong all motor), too much back pressure?(2 1/4 piping, high flow cat, high flow resonator, straight through canister) any input would be greatly appreciated.Thanks a lot guys!

  2. #2
    Senior Member
    Join Date
    Mar 2004
    Posts
    1,939
    Rep Power
    23

    Default

    cracking xs power manifold, engine going (assume it's not been tuned yet), torn coupler (did you use silicone or cheap rubber), loose wastegate...the list could be endless.
    MAINSTREAM PERFORMANCE & DIGITAL BOX TUNING
    ECU CHIPPING/SOCKETING/TUNING-HONDATA, CROME, BRE, TURBOEDIT
    HONDATA DEALER/TUNER
    NISSAN REALTIME-NISTUNE
    MITSUBISHI AND SUBARU TUNING AVAILABLE!

  3. #3
    Virginity Cure BABY J's Avatar
    Join Date
    Nov 2005
    Location
    everywhere & nowhere
    Age
    46
    Posts
    16,170
    Rep Power
    46

    Default

    My 91 EF has no boost either... wait, I don't have a turbo though. DOH!
    "I'm not a gynecologist... but I'll take a look."


  4. #4
    look here, bish Stormhammer's Avatar
    Join Date
    Jul 2005
    Location
    Lawrenceville, GA
    Age
    38
    Posts
    9,288
    Rep Power
    35

    Default

    check your headgasket - it might have been blown?


    ̿' ̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿

  5. #5
    haters gonna hate Retro's Avatar
    Join Date
    Oct 2005
    Location
    Conyers
    Age
    37
    Posts
    1,378
    Rep Power
    22

    Default

    the manifold isnt cracked,no the engine is not tuned but it should still build boost right?,couplers are all good (used good ones rated at 30 psi) wastegate isnt even opening...im thinking either my compression is too low(the car ran good all motor) or the turbo is bad....i rebuilt the turbo right before i put it in because it had some shaft play but now it dosnt have any....the only thing that worries me is that it is blowing out a lot of oil.....when i took the intercooler pipe off the turbo oil started pouring out and there was oil pooled up in the pipes.....so im thinking bad turbo...any other ideas?

  6. #6
    AKA bodydropped THEONE's Avatar
    Join Date
    Jan 2004
    Location
    georgia
    Age
    47
    Posts
    3,339
    Rep Power
    26

    Default

    get another turbo. if that ones leaking oil and you just rebuilt it,somethings wrong. just get another turbo and do a boost leak test. that means put pressure on the whole system from the turbo inliet to the throttle body.
    yes i am....

  7. #7
    haters gonna hate Retro's Avatar
    Join Date
    Oct 2005
    Location
    Conyers
    Age
    37
    Posts
    1,378
    Rep Power
    22

    Default

    ok thanks man

  8. #8
    Senior Member
    Join Date
    Mar 2004
    Posts
    1,939
    Rep Power
    23

    Default

    yeah...turbo and i'd also do a compression test. i never recommend boosting on an untuned motor. ring lands could have collapsed.
    MAINSTREAM PERFORMANCE & DIGITAL BOX TUNING
    ECU CHIPPING/SOCKETING/TUNING-HONDATA, CROME, BRE, TURBOEDIT
    HONDATA DEALER/TUNER
    NISSAN REALTIME-NISTUNE
    MITSUBISHI AND SUBARU TUNING AVAILABLE!

  9. #9
    Banned
    Join Date
    Jan 2006
    Location
    Under the hood of my car...
    Age
    37
    Posts
    1,486
    Rep Power
    0

    Default

    so this maybe a dumb question.. but you do let it cool down right? if not your lines maybe seized..

  10. #10
    akaDick em Down Tony PSINXS's Avatar
    Join Date
    Apr 2005
    Location
    20 side of thangs
    Age
    40
    Posts
    11,782
    Rep Power
    34

    Default

    could be that sorry ass deltagate. get a TIAL. my buddy's deltagate on his SRT-4 took a crap on real quick.

  11. #11
    Drifter/Kneedragger
    Join Date
    Nov 2002
    Location
    Buford, GA, USA
    Posts
    6,528
    Rep Power
    30

    Default

    Quote Originally Posted by LemonAJAX
    so this maybe a dumb question.. but you do let it cool down right? if not your lines maybe seized..

    it takes a long time and many hot shutdowns to get the oil to cook bad enough to clog them up.

  12. #12
    haters gonna hate Retro's Avatar
    Join Date
    Oct 2005
    Location
    Conyers
    Age
    37
    Posts
    1,378
    Rep Power
    22

    Default

    no i let it idle for like 2 min. before i shut it off.....and as far as the wastegate, i know the detagate isnt the best, but the wastegate isnt the problem, its not even opening, which it shouldnt because the turbo isnt boosting enough to open it

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!