Whats up guys, question. How hard is it to change the stock t25 turbo for the sr20det in my 91 240sx hatch without pulling the motor. (turbo blown) Thx.
replace turbo sr20det
Whats up guys, question. How hard is it to change the stock t25 turbo for the sr20det in my 91 240sx hatch without pulling the motor. (turbo blown) Thx.
fairly easy. just pb blast the bolts and let them sit in advance.. you may still break the fasteners.
Its not hard at all. Just use PB on the bolts like green91 suggested and make sure you hit the DP bolts too. Use only quality 6 point sockets and you shouldn't round anything off but the may still break if your not careful. It shouldn't take you more than an hour to get it off.
Ryan Reynolds
"So long and thanks for all the fish"
looking to up grade got a T28 sr20det turbo with intercooler asking $300 for both in good condition runing when taken off. sorry for no pic give a call if interested in decatur. 404 468 1543
you have to remove the manifold and turbo as one peice. undo down pipe too and oil and coolant lines. it should come out easy
are u trying to sell something? if so u suck at life..Originally Posted by gregoriocivi
TAKE THE MANIFOLD OFF.
And miles to go before I sleep,
And miles to go before I sleep.
BWAHAHAHAHA!!! i would +1 you again but cant. good job though
that happens with me trying to rep u alot also.
And miles to go before I sleep,
And miles to go before I sleep.
Posting Permissions
Reply With Quote