CAM SHAFT POSITION SENSOR HELP?

[NEONRACER]

cps should be on the cam shaft right BEFORE the cam gear. see if theres a wire over there that may have corroded or came unplugged. disconnect the battery for 30 min and see if the code comes back right away

So it's on the opposite side of the head from the cam gears, like the majority of distributorless cars.

[NEONRACER]

Odds are the sensor just went bad. It's probably not picking up the cam magnet properly. Easy fix but the sensor won't be cheap.

[carrascopa]

Odds are the sensor just went bad. It's probably not picking up the cam magnet properly. Easy fix but the sensor won't be cheap.

word! thats what i hear.. hmm..

but yo if its caroded how do i clean it

[NEONRACER]

I am sure you can get a new magnet, most of them are screwed to the camshaft. I would take the sensor off and clean the contact point with some carb cleaner. I would put money that the sensor itself is bad though. Hopefully there isn't a wiring problem but you haven't modded that car have you?