Quote Originally Posted by gsrteg View Post
use a dent puller (the suction cup puller aint gonna cut it, use the drill in screw type or welder pin type puller) . OR If you can access the quarter panel from the inside of your car, then use a rubber mallet with a wooden block on the other side, and lightly hammer it out as much as you can from the inside, carefully not to thin out the metal or damage it worst... Afterwards, grind the area around dent with air grinder, use body filler (aka: Bondo, or Evercoat Glaze(fiberglass)) to fill up the uneven dent. Use 60-80 grit sand paper break down as much material off, then sand down with 180 and 220, and primer....if you afraid to do yourself, then go ahead and pay a bodyshop...
I used to work at a bodyshop so I know how to fix it but I dont have the tools or the time toyota keeps me busy lol