d16y7 questions

[vtecdude93]

i have a d16y7, i want to make some more hp. does anyone know any way ?
i heard about the y7 and y8 head. or go boosted but i dont know which one is better. i want to make up to 200 at least its going to be my DD. thanks IA

[Theycall_Metue]

stay y7 since its low compressiong, boost it, it'll make 200 easy on tune
d16y8 is only like...... i think 100 to the wheels?

[vtecdude93]

i want to go all motor before i boost

stay y7 since its low compressiong, boost it, it'll make 200 easy on tune
d16y8 is only like...... i think 100 to the wheels?

[Barefoot]

id go y8 then boost.

[-EnVus-]

swap ya intake manifold to a y8 and a y8 header or aftermarket

[vtecdude93]

i want to go all motor first man

[-EnVus-]

i want to go all motor first man

no way with just y7 id think

[H1Cblacknight]

I'll tell you straight up. My buddy has a y7 w/ a z6 head thats got crower springs/retainer. Has 4-2-1 header, exhaust, intake, 7lb flywheel CC stage 2 obx 10mm wires with a tune from scotty at mainstream and still only put down 135 to the wheels. If you want 200 you gotta boost.

IMO.....Go with the y8 head and IM. get I/H/E. Maybe flywheel if you want all motor no boost, NGK wires and plugs small shot NO2 and Get a tune All motor on a budget.

If you got MULA $$$$$ Start talkin forged internal and shit!

[vtecdude93]

if boost what kinda learn me out on this thanks man

no way with just y7 id think

[chinitoxamor]

lol, oh lord

[vtecdude93]

thanks... i want a little more hp dont got to be 200

I'll tell you straight up. My buddy has a y7 w/ a z6 head thats got crower springs/retainer. Has 4-2-1 header, exhaust, intake, 7lb flywheel CC stage 2 obx 10mm wires with a tune from scotty at mainstream and still only put down 135 to the wheels. If you want 200 you gotta boost.

IMO.....Go with the y8 head and IM. get I/H/E. Maybe flywheel if you want all motor no boost, NGK wires and plugs small shot NO2 and Get a tune All motor on a budget.

If you got MULA $$$$$ Start talkin forged internal and shit!

[chinitoxamor]

I'll tell you straight up. My buddy has a y7 w/ a z6 head thats got crower springs/retainer. Has 4-2-1 header, exhaust, intake, 7lb flywheel CC stage 2 obx 10mm wires with a tune from scotty at mainstream and still only put down 135 to the wheels. If you want 200 you gotta boost.

IMO.....Go with the y8 head and IM. get I/H/E. Maybe flywheel if you want all motor no boost, NGK wires and plugs small shot NO2 and Get a tune All motor on a budget.

If you got MULA $$$$$ Start talkin forged internal and shit!

hes thinking fast for cheap right now, no job

[vtecdude93]

i just want something a little more to play with then go h22 you aready know it man. but if i ever swap out soon ill throw you my skunk2 cams

lol, oh lord

[chinitoxamor]

well ima just waiting, i need to get a pricing on j32a swap, i want more torque hehe

[scttydb411]

stay y7, y8 intake manifold, gt25r gt28r or super60, 200 easy.

[preferredduck]

id go y8 then boost.

yep, the y7 block is the same as a y8, i know y8 internals will fit in it perfectly. there is a y8 head and vtec solnoid on here for like $50 so there is a start. then you boost but not too much unless you wanna build the motor every 30k miles. i built a motor a few years ago and we used a y7 block, y8 crank, pistons, rods etc and bolted a y8 dead on it no problem. there are plenty of write ups and most of us can give good advice too. the head plus a p2p ecu and a couple of wires ran and presto you have a good start bro. then add boost and convert to obd-1 and have it chipped and tuned.