Results 1 to 20 of 20

Thread: 4 Post Car Lift for home use

Hybrid View

  1. #1
    Barefoot Motorsports
    Join Date
    May 2003
    Location
    jonesboro
    Age
    43
    Posts
    7,939
    Rep Power
    37

    Default

    Quote Originally Posted by slostang View Post
    four post lifts are commonly referred to as oil change lifts for a good reason. also, there is a reason 99% of shops you go into have two post lifts.
    thats pretty all the are good for. only shop i worked at that used 1 was for oil changes and easy chassis inspections.


  2. #2
    Stang Mod slostang's Avatar
    Join Date
    Apr 2008
    Location
    Southside
    Age
    36
    Posts
    9,875
    Rep Power
    34

    Default

    Quote Originally Posted by Barefoot View Post
    thats pretty all the are good for. only shop i worked at that used 1 was for oil changes and easy chassis inspections.
    yep. they are a pain in the ass.
    Quote Originally Posted by Echonova View Post
    And I do drive a Miata, so I am gayer than a three dollar bill...

  3. #3
    283.5°.516"(13.11mm) DirtyMechanic's Avatar
    Join Date
    Sep 2006
    Location
    Alpharetta, Ga
    Posts
    4,086
    Rep Power
    27

    Default

    Quote Originally Posted by dtmcnamara View Post
    due to the garage and ceiling height I feel a 4 post will be better, plus with most 4 posts I can get a lower car on it, especially if I recess it in the ground a little like we were talking about. I want a flush drive onto the ramps so I can get ANY car onto it. Dont know what kind of cars the future will bring, all I know is that I want to be ready and I want to do it right this first time around.
    i bet your garage floor isnt thick enough for a in ground lift. and it would have to be poured with that in mind. not a after thought. and i bet the garage floor isnt even thick enough for a 2 post.

    Quote Originally Posted by Barefoot View Post
    thats pretty all the are good for. only shop i worked at that used 1 was for oil changes and easy chassis inspections.
    and i bet some alignments.
    The G Spot Hero

    "Nitrous is like a hot girl with STDS, you know you want to hit it but your afraid of the consequences."

  4. #4
    Barefoot Motorsports
    Join Date
    May 2003
    Location
    jonesboro
    Age
    43
    Posts
    7,939
    Rep Power
    37

    Default

    Quote Originally Posted by DirtyMechanic View Post
    i bet your garage floor isnt thick enough for a in ground lift. and it would have to be poured with that in mind. not a after thought. and i bet the garage floor isnt even thick enough for a 2 post.


    and i bet some alignments.
    yah that 2. we didnt do them but most shops do.

    as for the floor i was goign to say that in my last post but forgot. u need atleast a 4" min reinforced floor.


  5. #5
    JZX FTW!!! dtmcnamara's Avatar
    Join Date
    Jun 2005
    Location
    Dacula GA
    Age
    41
    Posts
    5,572
    Rep Power
    31

    Default

    Quote Originally Posted by DirtyMechanic View Post
    i bet your garage floor isnt thick enough for a in ground lift. and it would have to be poured with that in mind. not a after thought. and i bet the garage floor isnt even thick enough for a 2 post.


    and i bet some alignments.
    the thing is that the driveway and the garage all need to be re-poured. There use to be a big tree next tot he house and about 3-4 years ago it died and fell and then roots from under the driveway decided to decay and make the driveway fall a little as well as where the garage door meets the floor.

    I am ready to take a jack hammer to where the posts would be and reinforce inside the garage and/or the entire garage if needed. Once the S2000 sells I will have all the money to get it done.

    Also I am glad you guys are bringing up these points as well, I need to talk to a few people to double check on the concrete and everything else. Keep the possible problems coming

    thanks

  6. #6
    Fuck Your AC130 browningboy7's Avatar
    Join Date
    Dec 2008
    Age
    39
    Posts
    2,587
    Rep Power
    22

    Default

    Quote Originally Posted by dtmcnamara View Post
    the thing is that the driveway and the garage all need to be re-poured. There use to be a big tree next tot he house and about 3-4 years ago it died and fell and then roots from under the driveway decided to decay and make the driveway fall a little as well as where the garage door meets the floor.

    I am ready to take a jack hammer to where the posts would be and reinforce inside the garage and/or the entire garage if needed. Once the S2000 sells I will have all the money to get it done.

    Also I am glad you guys are bringing up these points as well, I need to talk to a few people to double check on the concrete and everything else. Keep the possible problems coming

    thanks
    My stepdad has built 233298 tires plus stores and done the installs/anchoring and everything on the lifts. When you get ready to do it we can handle it from the concrete to the install. Just lemme know, Any questions feel free to PM me.
    Quote Originally Posted by cprtyler View Post
    bump wish had the cash for a tranny
    Epic Foxbody Thread Crew Member #01

  7. #7
    283.5°.516"(13.11mm) DirtyMechanic's Avatar
    Join Date
    Sep 2006
    Location
    Alpharetta, Ga
    Posts
    4,086
    Rep Power
    27

    Default

    Quote Originally Posted by Barefoot View Post
    u just need a contractor who has built commercial shops before. personally if u arent planing on using for profit (20 plus cars a week) your wasting time and lots of money.
    shhhh.... no its not... i plan on building a garage with a lift when i look for a house. they are cheap and omg so useful when you tinker around with "stuff"
    The G Spot Hero

    "Nitrous is like a hot girl with STDS, you know you want to hit it but your afraid of the consequences."

  8. #8
    JZX FTW!!! dtmcnamara's Avatar
    Join Date
    Jun 2005
    Location
    Dacula GA
    Age
    41
    Posts
    5,572
    Rep Power
    31

    Default

    Quote Originally Posted by browningboy7 View Post
    My stepdad has built 233298 tires plus stores and done the installs/anchoring and everything on the lifts. When you get ready to do it we can handle it from the concrete to the install. Just lemme know, Any questions feel free to PM me.
    I will contact you guys once we close and get to the garage. First things first we are ripping the windows out for new ones then all new floors.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!