I have a 99 mustang gt with the 4.6 and i went to change the plugs and the plugs are red like their burnt. wtf. what could be causing that? thanks
I have a 99 mustang gt with the 4.6 and i went to change the plugs and the plugs are red like their burnt. wtf. what could be causing that? thanks
Red? Im sure you're maybe seeing a brownish hue?
http://www.ultralightnews.ca/article...sparkplugs.htm
That site should help you decide.
Either way, take a photo and post it.
did you let the motor cool down before you decided to remove the plugs?
yeah it was sitting overnight. there motorcraft, oem the ones that come factory so its not aftermarket. they all look the same.
If it is a brownish hue what does that mean?
i have an exhaust system and headers and cold air intake. it feels like its lagging when i get on it. idk what it could be though. i just replaced the fuel filter.
Describe that lagging situation a little more. Do you feel the engine stumbling? Or does it just not pull as hard?
Mine's the red one.
i checked the gapping of the old plugs and there off by .10, is that a big diff and can cause any trouble?
its not stumbling, it just dont pull hard as it should.
Mine's the red one.
Youve got a 99, it could probably use a good seafoaming.
i actually just put that octane booster 104 in it the last fill up. so it should be good on that.
how hot are they?
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
ohh well im guessing 104 is crap. what do u use?
Nothing! A good old fashion tune up.
Seafoam your car, change the plugs, check for vacuum leaks, check gaskets on your intake manifold , etc. Its a 99, its almost 11 years old, plastics and rubber dont last forever. The car has been through about 25 seasons of hot and cold, itll wear shit out faster than you think.
If you still want to put shit in your car, run Lucas Automotive gas treatment only.
sorry guys im not familier with the seafoaming concept. can u explain and where can u get it and how much do u use. thanks
Yeah you're right.
U.S. measurements > me
Mine's the red one.
Check out my for sale threads!! 15" competition speakerbox, 1TB External hard drive, and plenty of car parts!!!
I Need some WRX, 350Z, 240SX, Really any car owner to let me do R&D for Ground Kits, Please Let me See the layouts!!!
the oems are platinum because ford uses a wasted spark ignition system .... dont put coppers in there... use platinum motorcraft. not bosche either they are very shitty and the iridiums are junk
they are brown because they are burning on the exhaust stoke when the exhasut valve is open......the copper cores run like shit.
i used them on my svt cobra when i was spraying and had all sorts of problems with them....... bad thing is. copper cores are recomended with nitrous...... and platinums are not...so much....
copper cores are getting hot as fuck because the electrode is so big....and they are creating resistance in your ignition coil pack.....
get new plugs and wires and youll be good
shit matt, just drive the damn thang! lol.