Wire tuck help!!!!!!

[Jdmsol]

I'm doing a wire tuck on my sol and I've already relocated the battery and moved the fuse box under the dash and rerouted all of the other wires between the fenders......now I need to know where to run the main engine connectors if someone could give me some pointers on where to run them to where they r hidden that would be great........ Thanks!

[NoWAyItZTOMmY]

if u don't have heat, run it there. if you do, you gotta make a hole

[Jdmsol]

I have heat but no ac so where do I make a hole?

[NoWAyItZTOMmY]

wherever you want it to go through. just make sure you don't drill through the heater core.

[Jdmsol]

Alright trhanks bro!

[H1Cblacknight]

take a hole saw and drill a hole towards the bottom of the firewall directly under neath the proportioning valve. check it first by taking you middle console completely out so you have a an idea where you are going to drill. then just lengthen your wires on the 2 plugs from the harness on the inside of the cabin that connect to the motor connectors

[Jdmsol]

Damn that's a lot of wires to extend lol

[PURP]

Damn that's a lot of wires to extend lol

That's part of the game though, man.

To do a proper tuck, you will splice/soder(sp) a lot of wires for reaching purposes

[a94civicex]

G/L bro....!

[B18c1Turboed]

That's part of the game though, man.

To do a proper tuck, you will splice/soder(sp) a lot of wires for reaching purposes

Thats not true, but what do i know.

[Captain-Obvious™]

That's part of the game though, man.

To do a proper tuck, you will splice/soder(sp) a lot of wires for reaching purposes

I know a different way....

[PURP]

Thats not true, but what do i know.

it is true.... but what do I know?

[B18c1Turboed]

it is true.... but what do I know?

Nope, i guess you better go have Bucky show you how too do it better then.He obviously didnt teach you right.

[Jdmsol]

I figured I would have to splice those but I extended my engine harness and I figured I could just run it through the firewall into the cab and connect them there but I'm new at this soooo good advice is welcome!!!

[B18c1Turboed]

I figured I would have to splice those but I extended my engine harness and I figured I could just run it through the firewall into the cab and connect them there but I'm new at this soooo good advice is welcome!!!

Ill let the Tuck king explain it too you .
Some of you guys need to step up and make your own harness instead of just redoing your factory one.

[Jdmsol]

^i don't know where to get the plugs and such, its easier to use the old harness and I'm not chase so I'm learning as I go

[B18c1Turboed]

READ AWAY
http://www.honda-tech.com/showthread.php?t=1693934

[Jdmsol]

Anymore tips?

[silverDA]

who is the tuck king?

Ill let the Tuck king explain it too you

[Jdmsol]

who is the tuck king?

Purp