Cable tranny help

[Jdmsol]

I'm new to this and I've googled this and came up with nothing helpful so please no negative comments. I have a ys1 tranny going in a hydro sol, question is how do I make this tranny work in my car I've ordered the conversion kit from innovative. So everything else I need help on. If u have some usefull info or have done one yourself please let me know thanx in advance

[punkr6]

everything you need is in the kit, what is your question again ?

[Jdmsol]

What else do I need to do any wiring?

[Starrfire]

nope, get a newer style VSS, the rest of the stuff in the kit like the master cylinder adapter and the trans mount will be about all you need, and since its a ys1, it is the bigger splined trans so you can use clutch kits for 94-01 integra's(Minus the throwout bearing of course).

[Jdmsol]

K now as far as the vss goes how do I go about hooking a newer one up to it?
Can I use a d series sensor?

[punkr6]

K now as far as the vss goes how do I go about hooking a newer one up to it?
Can I use a d series sensor?

YES

I found a link for ya...
http://hondaswap.com/general-tech-ma...es-vss-128865/

[Jdmsol]

Jw cause the length and the splines r exactly the same

[95droppedhatch]

u can use a d series speed sensor i have a d series on my hydro gsr trans

[punkr6]

u can use a d series speed sensor i have a d series on my hydro gsr trans

Correct.....But you should change the gear on the bottom.

[Jdmsol]

Alright thanks guys

[Jdmsol]

u can use a d series speed sensor i have a d series on my hydro gsr trans

Did u change the gear