Originally Posted by
scttydb411
any cel? is it hitting vtec @ different rpm under the exact same conditions (wot, temp, etc), or does vtec rpm change based on varying throttle position?
not pulling the same in vtec could mean you have one of the cams out of time when you did the belt...double check that. you may have 2 different problems unrelated to your issues.
check:
1. cel
2. cam timing
3. oil level
4. jump vtec solenoid directly to see if it kicks everytime you jump it
5. check oil pressure @ from orifice on the head to make sure you have plenty of pressure
6. check to make sure the oil pan isn't dented and too close to the pickup
Posting Permissions
Reply With Quote