Wiring a b18a1 in a delsol help

[Jdmsol]

I got a b18a1 ls non vtec complete swap out of a da and I'm putting it in my sol. Can someone tell me what I need to do as far as which engine harness do I need or modify cause the one that came with the motor want work cause my sol was vtec. I do have the del sol vtec harness still

[dirk-diggler]

your harness should plug in pretty much , is it a obd1 motor out of a da lmk

[Jdmsol]

I think so but does it matter that my harness is a vtec?

[dirk-diggler]

no it dont matter , u will have to xtra plugs left over for vtec, u need to run the ls ecu

[EmminoDaGreat]

You will just have to extend some things, and not use some plugs. from your del sol harness of course.

[Tree]

if you use the del sol, your going to have to make the o2 wires and the oil pressure sensor plug wires long and make the intake manifold sensor wires long too.

[Starrfire]

del sol vtec shift linkage is the biggie, and also ditch the cable trans and get a hydro one, it will actually be cheaper this way. Get all the right equipment, its really easy.

[Jdmsol]

Yea I'm tryin to get a hydro tranny and I already have the shift linkage it a b series linkage for a del sol

[twiztid cc]

i think that is obd-0 i'm sure it is

[dirk-diggler]

i think that is obd-0 i'm sure it is

well u got obd0-and obd1 da,s , he says its a obd1

[twiztid cc]

well u got obd0-and obd1 da,s , he says its a obd1

i sold him the motor

[Tech5]

Hope you have a Hydro tranny...

[Tech5]

if you use the del sol, your going to have to make the o2 wires and the oil pressure sensor plug wires long and make the intake manifold sensor wires long too.

[Jdmsol]

i think that is obd-0 i'm sure it is

Hell I thought it was obd1 since it is out of a 93, the motor is a 92 an its still obd1 unless its been converted right?

[envision]

Hell I thought it was obd1 since it is out of a 93, the motor is a 92 an its still obd1 unless its been converted right?

If it's not been converted it should be OBD0 what color are the plugs on the motors if any of them are white thats normally a good indication that it's OBD0 OBDI and OBDII have grey plugs

[Jdmsol]

If it's not been converted it should be OBD0 what color are the plugs on the motors if any of them are white thats normally a good indication that it's OBD0 OBDI and OBDII have grey plugs

All the plugs I see are grey obd1 right? How else could I tell?

[Starrfire]

90-91 da integra's are obd0 and the 92-93 integra's are obd1. Lots of mis information in here. So basically it is identical to a b18b1, minus the breather box being different. But basically get all the right mounts, the right ecu, and minimal wiring then it should all be good.

[Jdmsol]

That's what I like to hear lol thanks bro!