true that, but some arnt 12v.Quote:
Originally Posted by 95droppedhatch
but if you do run it that way, you want your fogs blinking with your corner lights?
Printable View
true that, but some arnt 12v.Quote:
Originally Posted by 95droppedhatch
but if you do run it that way, you want your fogs blinking with your corner lights?
nope that is why you run it to the constant power for the running lights it is a three wire plue 1 wire for the ground 1 wire for the running and 1 wire for the blinker
Which wire is the running lights wire so I know and can just splice into it instead of splicing all wires.... Green = Ground correct....?
normally a dull color is ground, like brown or black
Quote:
Originally Posted by blue_gt
Thanks....
if they are from ebay then the wires are usually backwards! mine where when i got mine and it will burn the wires up check the plugs and see if the prongs are in the right location cause ebay sends them backwards
If anyone located around me that knows how to wire them up to my running lights & bypass the Relay, send me a PM.... I need an extra hand so I don't mess anything up or cut a wire that doesn't need to be cut....
I need them to work again.... I can't stand them not working....!
also make sure the wires can handle the load when you hook it up, i have burnt wires before on lighting and have had a piaa relay go bad, but they sent me a new one for free(lifetime warranty), i may still have the old wiring for them which may help you out because its a better guage, let me look in my wire box to see i may be off I-20 at cascade road Weds morning.
JUST WIRE THE POWER WIRE TO YOUR POWER FOR HEADLIGHTS OR CORNER LIGHTS
GROUND TO ..... GROUND
Okay, after finding a new relay & plugging it up the foglights & still didn't work.... Harness more than likely was fried.... So then I just decided to cut the wire harness off (toss-it) and run each foglight to a chasis ground and power to the headlights power.... They are working like new again, FINALLY....
Thanks to everyone giving me their input & advice....
Thats exactly what i told you to do.. Except wire them to running lights.. BUT none the less.. they work.. :goodjob:
I'm going to run them to my running light eventually, for right now they work, so I'm satisfied with it....Quote:
Originally Posted by Black4DrEK
Speaking of which, what color wire on my corner lights do I run the fogs too...? I believe I've got a green, black & red wire, which one will I need to splice in too to have them wire to my running lights....?
Seal the lens. But not around where the bulb goes. Keep water from getting in through the front. use a larger size of shrink wrap around the plugs so water doesnt get into there either
no need, water doesn't get in & plugs are gone....! Bye Bye POS wiring harness....!Quote:
Originally Posted by 98DxNdaSkYz
Add some DOT4 Fog Light Fluid
funny guy.... I don't know why people done get that the fogs are WORKING again.... Just need to know which wire to run them to, to have them come on with running lights, just need to know which color to splice them in to....?Quote:
Originally Posted by Stuntman G