Results 1 to 7 of 7

Thread: lights questiong

  1. #1
    the duckster
    Join Date
    Nov 2008
    Location
    Rome
    Age
    35
    Posts
    4,681
    Rep Power
    23

    Default lights questiong

    this might be noobish but oh well
    can i pop the covering off of my headlight?
    or is it vacuumed tight?
    i saw someone say something about an oven before?


    anyways the little plastic think over my bulb is just hanging there and it messes up my headlight
    lmk
    thanks in advance


    Race Ready Developments Member #5

    Rome Crew

  2. #2
    the duckster
    Join Date
    Nov 2008
    Location
    Rome
    Age
    35
    Posts
    4,681
    Rep Power
    23

    Default

    i spelled question wrong. lmao


    Race Ready Developments Member #5

    Rome Crew

  3. #3
    Look Behind You !!! -EnVus-'s Avatar
    Join Date
    Sep 2006
    Location
    Projects
    Posts
    8,743
    Rep Power
    35

    Default

    Most you could if its a plastic lens. If you do it will never seal back right unless you use something to seal it with. I have tried this before myself and ive learned to just replace the light its easier. You also will have a issue with fogging up and humidity once you break the seal.

  4. #4
    the duckster
    Join Date
    Nov 2008
    Location
    Rome
    Age
    35
    Posts
    4,681
    Rep Power
    23

    Default

    oh okay
    thanks bro


    Race Ready Developments Member #5

    Rome Crew

  5. #5
    if you fall get back on 95droppedhatch's Avatar
    Join Date
    Mar 2005
    Location
    in a paint booth
    Age
    41
    Posts
    1,931
    Rep Power
    22

    Default

    if you do it right you wont have a problem i have broke my headlights apart on my 94 civic and my 96 civic just preheat the oven to 200 and put the headlight in there for about 7-10 and then pull the lens off clean the glue off and reseal it completly and you wont have any problems with moisture or water as i havent had any problems

  6. #6
    One of a Kind. DeeAOne's Avatar
    Join Date
    Aug 2007
    Location
    Warner Robins
    Age
    34
    Posts
    5,717
    Rep Power
    28

    Default

    be careful with glass headlights. i dont think da's are glass but if they are you can easily crack them if you dont heat the glue up enough.


  7. #7
    B-Town Crunk Force
    Join Date
    Aug 2008
    Location
    Statesboro, GA
    Posts
    1,375
    Rep Power
    20

    Default

    Pulled the lenses off of my old 2000 civic. Used a hair dryer and flat head screwdriver. It was a bitch, but it worked. I didnt use anything to reseal them when I pressed them back together. The oem adhesive sealed back up with itself pretty easily, for me anyways, and I never had any leakage problems with moister gathering on the inside.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!