bent valves?

[teh_mugen18]

bent valves all day. somethings need to be left to the pros if the owner is feeling lazy on anything. or is unsure about any part and timing is 1 of them. put the belt back on the correct way. then run a comp test to confirm.

x238923794623589623958million on the compression test. Will tell you how everything inside the motor is going to run before you even try running it, that way if its messed up in any way, you'll know it before things can be made worse.

EDIT: to the OP, i have a couple spare LS heads with good valves, and valve seals in them if you'd like to buy one from me for the low-low....only need is for it to be resurfaced before you put it on. LMK.