Quote Originally Posted by AyO Deebo View Post
If your running a obd1 ecu don't put in a obd2 dizzy in there because it won't fire correctly. So your putting it in a 93 civic just keep the z6 dizzy only 1 bolt should hold it up i beleive since its not the same head as the dizzy and make sure you put it in correctly on the right side when you put it in the head. and even though you rewire the y8 dizzy to obd1 the internals still thinks its running as obd2.

wrong. It doesn't matter.
a z6 dizzy won't fit a y8 head correctly. and the problem is probably your wiring. there is a diagram for colors here...
http://www.phearable.net/tech/wiring...istributor.jpg

You could also have kept your harness obd1 and used a d15b7 distributor, it bolts up correctly to a y8 head, but the z6 one doesn't.