d16 idle issues

[k3tsurui]

this is like the 30th time i've said this and it has like a 80% success rate......replace the pvc valve, the hose that connects to the pvc to the shit box behind the block and the vacuum attachment to that box.....use honda parts/don't buy auto part pvc shit (ive seen some to be like 30 mil off factory spec). all the parts will cost you like 35 bucks from honda but it will make your life so much better


i dont see how the vtec pres switch code is related (which makes me think that you might have a simple plug in the wrong spot issue)...not saying that this works with all cases, but you did say you've tried everything but i dont see you list this...if for nothing then at least you did some good maint work. but anyways gl and let me know if it works

[Turbodude06]

Check that the connectors are going to the right sensors and not mixed up. Its easy to plug the wrong connectors to the wrong sensors. If it happened after the swap was done...

this is like the 30th time i've said this and it has like a 80% success rate......replace the pvc valve, the hose that connects to the pvc to the shit box behind the block and the vacuum attachment to that box.....use honda parts/don't buy auto part pvc shit (ive seen some to be like 30 mil off factory spec). all the parts will cost you like 35 bucks from honda but it will make your life so much better


i dont see how the vtec pres switch code is related (which makes me think that you might have a simple plug in the wrong spot issue)...not saying that this works with all cases, but you did say you've tried everything but i dont see you list this...if for nothing then at least you did some good maint work. but anyways gl and let me know if it works

^x2 on both good luck buddy. I wouldn't say ecu yet cause it wasn't doing it before when u had the ecu right?