multi point conv. last question

[THEONE]

yea c1 goes to blu/g and c2 blu/y..
but which pin out on the ecu are you wireing up the injectors to.

harness A 1,3,5,7 and the resistor box is at 15 on the same harness,the only issue im having is not having the si distributor connector so im gonna try and wire up the 1.5's square connectors to replace the round one.

[THEONE]

what a waste of a day! put everthign in wired it all up and no start! i have a code8 on the ecu im thinking the distributor is bad,so i put all the multi point stuff back did everthing else in reverse ha! damn ebay!