What's the Deal with machine shops in GA??
I've called around to many different machine shops (at least 10) all over Georgia, to see if any of them could do a line hone job on my gsr head, i know that it needs one. They've all said that they cannot do it, and when one shop recommends the next one, the next one says no and recommends to me another one and then they say no as well. Its somewhat frustrating, and i was wondering if no shops in Georgia do line honing, where would be the next best place to look?
ATLANTA DA-Squad member #26...[{Home.BASE.Racing}]
•R.I.P. LsVtec DB1....hello b20v EF...!•
Originally Posted by cactusEG
Line honing a head is pretty tricky and most places dont want to do it. Its too much risk. Plus you have to cut the cam caps down to fit in most cases.
You are better off just buying another head
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
have u called dover. an ive had scotts do it for me in the past.I've called around to many different machine shops (at least 10) all over Georgia, to see if any of them could do a line hone job on my gsr head, i know that it needs one. They've all said that they cannot do it, and when one shop recommends the next one, the next one says no and recommends to me another one and then they say no as well. Its somewhat frustrating, and i was wondering if no shops in Georgia do line honing, where would be the next best place to look?
Yeah, Dover said they no longer do it...
ATLANTA DA-Squad member #26...[{Home.BASE.Racing}]
•R.I.P. LsVtec DB1....hello b20v EF...!•
o then u are going to have a really really short list if any at that point. call scott u never know. he did 1 for me 4 years ago. dont know if he still does but he did atleast.Yeah, Dover said they no longer do it...
PM'd....
ATLANTA DA-Squad member #26...[{Home.BASE.Racing}]
•R.I.P. LsVtec DB1....hello b20v EF...!•
replied
lol thanks
ATLANTA DA-Squad member #26...[{Home.BASE.Racing}]
•R.I.P. LsVtec DB1....hello b20v EF...!•
try calling lamar walden automotive i think that the name they are in norcross. or david ball in lilburn. those guys do trick performance work. maybe they can help. good luck
yes i am....
4) Larry Smith Automotive Machine Shop
20 Bale Street Southwest, Rome, GA 30165
(706) 295-3121
Boring, Honing, Assembly, Decking, line honing, Head services, really anything except high end head work stuff.
The did a line honing on my block when I added a gridle, they may be able to help you with your head.
Most machine shopes can do line boring for the crank but not on cam journals. This is because the cam journals are so small. The only place I know that does it is Cylinder Head Exchange in Marietta. They can also weld it up and recut it needed. I just had a Evo head done by them a few monthes ago. Good luck.
Main Stream Performance
Don't make excuses...Make Power
Digital Box Tuning (Scttydb411)
www.mainstreamperformance.com
MSSracing.com
You may have better luck getting another head.
Posting Permissions
Reply With Quote
