cv axle

[2003Accord]

i was putting in my new suspension in my 93 accord and i went and got the ds front strut out and when i got it out the cv axle joint came apart inside the boot and now it wont bend back in far enough to put it all back together. How can i realign it?

[Barefoot]

open the boot so u can see whats going on inside. then put a lil more bearing grease in there. get a axle boot clamp and strap it back down.

[2003Accord]

hmm.. alright. Thanks man.

[D3UC3S]

if its come apart inside the boot it usually means time for a new axle. Not exactly a driveway job, unless you got the specialty tool to put the metal bands back on the rubber boots..might as well replace both since you will be dropping the whole suspension anyways.

Autozone FTW....2 new OE replacement axles..../your problems

[Barefoot]

if its come apart inside the boot it usually means time for a new axle. Not exactly a driveway job, unless you got the specialty tool to put the metal bands back on the rubber boots..might as well replace both since you will be dropping the whole suspension anyways.

Autozone FTW....2 new OE replacement axles..../your problems

not really a brand new axle will do the same thing if pulled. the tool is like $10-15 the clamp $2.

[2003Accord]

well i took the boot off and put it all back together. one of the slider things came out and it wasnt going back in. But its fixed so Thanks dudes.

[Barefoot]

well i took the boot off and put it all back together. one of the slider things came out and it wasnt going back in. But its fixed so Thanks dudes.

see it was simple once u can see in there.

[D3UC3S]

true.true.

excuse my crappy post
I guess it was bad memories of taking my last axle outta the h23 and the cv fell over like a limp noodle.

for gettin it fixed!