so i got done building my bottom end tonight.

its a obd2 ls block with a gsr crank, gsr eagle h beam rods, and je standard size pistons. . .

heres my question. the je pistons feel a bit sloppy in the cylinders. when comparing the pistons to the ls ones, the skirts are wayyyy smaller so the surface area on the cylinder walls is less. well im guessing now 1/32" or so wobble with the pistons..... i just cant believe this is kosher.

when i ordered from je i ordered pistons for a 91mm block standard bore. i lightly bored the block and didnt remove much material. just enought so that the ring have something to seat with..

well im hoping someones gonna tell me this is normal and je pistons are usually sloppy.

i know im not giving you numbers with this question... but i think there might be some people that can chime in.