obd0 to obd1 Distributor Conversion

[Formally...]

So I am assuming you are going to use a OBD0-OBD1 conversion harness at the ecu. Do you already have the conversion harness? Have you already done the DPFI to MPFI conversion?

Anyways the blue/green strip and blue/yellow strip are the wires that you will have to run from the ecu to the dizzy. The DPFI does not use this sensor. The other wires just match up color for color and the large white wire on OBDO goes to the yel/green stripe wire.

[southside]

So I am assuming you are going to use a OBD0-OBD1 conversion harness at the ecu. Do you already have the conversion harness? Have you already done the DPFI to MPFI conversion?

Anyways the blue/green strip and blue/yellow strip are the wires that you will have to run from the ecu to the dizzy. The DPFI does not use this sensor. The other wires just match up color for color and the large white wire on OBDO goes to the yel/green stripe wire.

Yea I figured those two ran to the ecu but wasnt sure and yes I already did Mpfi conversion with the engine harness and I have the ecu jumper already in. Reps+