Angel Eye Light Rim is out...
well one of my angel eye rims are out....has any of ya'lls went out, if so, how did you get it replaced ( if you did)...or did you just buy a new set of headlights...cause if you bought a new set, i might as well do a conversion rather then buy the same exact lights...right...RIGHT!?!?!?!?
But yea, your help, experiences and advice will eb greatly appreciated. Thanks.
i know you love my swagger
OG Black Delegation member
RIP My Homie Elliot Sloan
none of mine have went out, sure the wiring isnt messed up?
positive, cause only the inner rim is out, my other 3 are fine.Originally Posted by Schugg
i know you love my swagger
OG Black Delegation member
RIP My Homie Elliot Sloan
slim chance the bulb went out seeing as they are LED's, but it's always a possibility. i'm sure it's possible to take it apart and replace the LED though.
I have seen a million honda halos go out, try putting in some real DDE's in it instead of the cheap led crappers if u really want that look. I had them on my honda but never plugged them in becuase i didnt think the look was appropriate on a honda. Maybe the wiring is messed up on only that one? Chances of the LED goin bad are slim, but possible, double check the wiring. What headlights do you have?
"The 1911 is a collection of subsystems that must work together. Each part must be prepared and fit properly not only in and of itself, but also with regard to the other parts with which it must operate for the gun to function and appear as desired."
http://www.mmotorwerks.com/products/...hp/II=113/PA=0
there, thats if u wana do it right. If you want, i can go measure the approximate diameter of my headlight, to see if they will fit your car. You will have to be crafty with them, but with some time, you would offically have the only honda with real angel eyes+2 if u decide to do that.
"The 1911 is a collection of subsystems that must work together. Each part must be prepared and fit properly not only in and of itself, but also with regard to the other parts with which it must operate for the gun to function and appear as desired."
http://www.mmotorwerks.com/products/...hp/II=113/PA=0
there, thats if u wana do it right. If you want, i can go measure the approximate diameter of my headlight, to see if they will fit your car. You will have to be crafty with them, but with some time, you would offically have the only honda with real angel eyes
i like that, i think imma buy that....thats bout how much it would cost to get a new set of headlights anyway....i already committed spendin that much
i know you love my swagger
OG Black Delegation member
RIP My Homie Elliot Sloan
yea, and plus u can see them in the day time... Might want to check diameter and make sure they will fit, i dont think it will be easy, but very possible. Your lucky 200 bucks for headlights... The headlights , HIDs, DDEs i am lookin at cost 999 plus shipping..lol ouch. ill find a pic of DDEs inthe day time
"The 1911 is a collection of subsystems that must work together. Each part must be prepared and fit properly not only in and of itself, but also with regard to the other parts with which it must operate for the gun to function and appear as desired."
you would be pretty pimp if you can pull off a clean install with DDEs...
this guy might still have his forsale: http://forums.bimmerforums.com/forum...t=dde+pictures
"The 1911 is a collection of subsystems that must work together. Each part must be prepared and fit properly not only in and of itself, but also with regard to the other parts with which it must operate for the gun to function and appear as desired."
alright coo...i was thinkin bout just doin a conversion all together now...either the new bmw headlights ( which have been done)...or the new civic headlights....which will be orginal for a quick minute
i know you love my swagger
OG Black Delegation member
RIP My Homie Elliot Sloan
say 'no' to conversions man... conversions are a thing of the past. but thats just my opinion. Also, my opinion is if you need to do a converison to stand out, you got the wrong car. but hey, thats just me. good luck, i would love to see a write up on the install, should be interesting. I htink you will be the first honda to do it, at least the 1st i know of.
"The 1911 is a collection of subsystems that must work together. Each part must be prepared and fit properly not only in and of itself, but also with regard to the other parts with which it must operate for the gun to function and appear as desired."
heres the headlight setup i am getting:
ZKWs with DDE enhanced 700
HID kit 350$
totaling 1050$ plus shipping, lol..... dam somtimes i miss hondas..lol
"The 1911 is a collection of subsystems that must work together. Each part must be prepared and fit properly not only in and of itself, but also with regard to the other parts with which it must operate for the gun to function and appear as desired."
good god Lol....well im tryna move on to an IS300....but i got too many things to pay up on before i can start that....and im sure by the tim eim ready, another car imm agon want will come along...so no way to tell whats next....but imma work with what i have.
i know you love my swagger
OG Black Delegation member
RIP My Homie Elliot Sloan
hey dont get me wrong, i wasnt raggin on your ride or anything, simply stating my position on conversions. I see a ton of award winning cars with out conversions. I just dont think conversions are "in" anymore, in my eyes at least. best of luck man, keep me updated on what u do with the DDEs.
"The 1911 is a collection of subsystems that must work together. Each part must be prepared and fit properly not only in and of itself, but also with regard to the other parts with which it must operate for the gun to function and appear as desired."
oh i know man, i didn't take it like that.
aiigh fa sho, i'll try and take pix of the process
i know you love my swagger
OG Black Delegation member
RIP My Homie Elliot Sloan
so its a done deal, you gonna go for it?
"The 1911 is a collection of subsystems that must work together. Each part must be prepared and fit properly not only in and of itself, but also with regard to the other parts with which it must operate for the gun to function and appear as desired."
yup, just talkin to my friend to see if he thinks we'll be able to do it, waitin for a response to tha text, im not too good at custom fabrication, but an extra pair of hands can never hurt
i know you love my swagger
OG Black Delegation member
RIP My Homie Elliot Sloan
theses a CCFL demon eyes, They look like they might be worth it. alot cheaper.. get these so i can come see if i like them lol
http://cgi.ebay.com/ebaymotors/BMW-E...04635551QQrdZ1
"The 1911 is a collection of subsystems that must work together. Each part must be prepared and fit properly not only in and of itself, but also with regard to the other parts with which it must operate for the gun to function and appear as desired."
Posting Permissions
Reply With Quote
