Quote Originally Posted by Doppelgänger
Dynamicsound- like you really care what people do with these kits. You get your money and obviously you're going to butter up and say everything is fine..you're not going to risk sales and say that it's a bad idea....
This is a extremely dumb comment. Implying that I will say whatever to make a sale. I will tell you like it is and you can choose to buy them or not, I could care less. I will tell you exactly what it is from my 5+ years experience of selling and installing HID kits. I can call BS from idiots that come onto forums at state things that have heard, read, or dealt with on the 1-2 HID Kits they owned. As said before, to have a clean cutoff, then projectors are the way to go. The small amount of spread that goes beyond the cutoff on halogen housings will not be "blinding" people if your headlights are properly aligned to the correct angle. This is what 99% of people do not do, so when you see a car shooting to high, you are chalking it up to some "ricer" that put a HID kit into a halogen housing. This does not make it true, sorry. On top of this, looking at the vehicle you drive, you are going to be much lower than most people because you 1) have a low to ground small car, and 2) it looks lowered. So you will be blinded by a good deal of cars because you choose to make your car lower than stock. The same when I have jacked up trucks riding behind me with normal halogen bulbs...they are shining right into my window. There are too many factors involved that can cause someone lights to blind people, so to chalke it all up to 1 reason and label them ricers shows me you have very little experience in them. Also, I would seriously look at your own vehicle before you call someone a ricer because you have a ricey vehicle. I am not saying it doesn't look good because it does, but tons of people would label you a ricer.