I thought I would share my twincharge project with yall. Feel free to ask me any questions. This project is being done by myself and another member on here Shubert_ae102.

Getting the old motor ready to pull


Old motor pulled


empty bay ready for new motor


new donor


Big port head installed with ARP head studs and HKS 2.0mm headgasket and TOGA HV oil pump installed


Modifying the intake manifold and supercharger plenum to fit



Bigport intake, Techno Toy Tuning adjustable cam gears, supercharger, waterpump and tubular manifold installed


E58 w/lsd tranny installed and engine ready to go back in


Engine bolted back in


4agze cam covers normally say
twin cam 16
super charger
shaved the cam 16 and super so that they now say twin charger and painted them black


tubular manifold reinstalled and t3/t4 turbo, manifold, tial 38mm wastegate installed


Garret intercooler and piping installed. Aeromotive fuel pressure regulator and stainless braided lines done. HKS SSQV BOV installed





Oil catch can installed. better view of the fuel lines. forgot to take pictures but we used rx7 550cc injectors


This past weekend, we got the AEM fuel and ignition controller wired in, Greddy profec electronic boost controller wired, AEM UEGO wired in and oil cooler and relocation kit put on. We got the oil feed and drain done for the turbo. Forgot to get some pictures before we left. We just need to finish the vac lines routed and the radiator mounted.