obd0 to obd1 ?????????

[hondachick22]

just wonderin if i buy a jumper harness from obdo-obd1 . do i re wire my dizzy and use obd1 or what , what all do i have to use and not use. any help lmk

[turbob20]

if its like the 0bd1-obd2 conversion harness that goes between the plugs and ecu then it should take care of everything.

[punkr6]

you need a obd1 dizzy,and ecu. I would also go with obd1 injectors, but you don't have to.

[punkr6]

http://www.g2ic.com/forums/showthread.php?t=86612

[ksniperfox]

from someone whos actually converted a obd0 car with a obd1 motor, you will need:

the conversion harness-about $100
obd1 ecu-about $100
obd1 dizzy for your motor-about $100
obd1 4 wire oxygen sensor-about $100
then you will need to wire it all up.-about 1-2 hour depending on your skills.

check www.rywire.com

they sell all the shit necessary.

[Thundercat]

or do a harness swawp instead but then add injectors to the list that ksniperfox made

[punkr6]

from someone whos actually converted a obd0 car with a obd1 motor, you will need:

the conversion harness-about $100
obd1 ecu-about $100
obd1 dizzy for your motor-about $100
obd1 4 wire oxygen sensor-about $100
then you will need to wire it all up.-about 1-2 hour depending on your skills.

check www.rywire.com

they sell all the shit necessary.

you wont need the $100 4 wire o2 sensor, because Scotty will remove it from your ecu when chipped....
also if your gonna stay turbo, now would be a good time to get some DSM 440cc injectors if your gonna keep the resistor box

[hondachick22]

you wont need the $100 4 wire o2 sensor, because Scotty will remove it from your ecu when chipped....
also if your gonna stay turbo, now would be a good time to get some DSM 440cc injectors if your gonna keep the resistor box

yeah i got the blue tops and thanks rodney

[punkr6]

welcome homie...

[scttydb411]

the dist won't be exactly plug and play...you'll have to re-pin it or get an obd0-1 dist jumper too. o2 isn't necessary if the ecu is chipped and you're getting tuned.

[punkr6]

here is a link to the dizzy adaptor and jumper harness
http://www.phearable.net/shoppingcar...mper-p-75.html
http://www.phearable.net/shoppingcar...ness-p-35.html

[GaGen2Teg]

i got the dizzy adapter forsale! shoot me a pm