well the intake mainfolds dont match up.you cant use the one from the 97 motor cause the map sensor is built into the throttle body and the 93 runs off of like a map canister with vacuum hoses.the intake ports on the 97 motor are smaller than the 93 version so the intake is leaking(using the 93 intake currently).im going to try and use the top section from the 93 and bottom section from the 97 but the fuel line on the 97 is on the drivers side and the 93 is on the passanger as long as the fuel rail from the 93 bolts on right and the top sections are the same i think ill be ok.i was just trying to figure out if anyone has done it.