Smoking + burnt rubber smell

[Tensa_Zanget]

i had the same problem and its not the caliper its the piston that is attached to the brake pedal from the booster that pushes the master cylinder you clearance is off and you need to get it checked.

ps. only honda was willing to fuck with mine to get it right


I found a site that tells you how to adjust it on the fly but it is going to take some time to get it right. Honda designed it so only they could easily work on it.

please provide the site if u can find it. You think if i were to get my caliper replace will that solve the problem?

[seanrg1116]

please provide the site if u can find it. You think if i were to get my caliper replace will that solve the problem?

The only way to fix it is to. Either buy the special honda tools, make some your self or di what I did and just swap a complete booster and master combo from another car.

ps if this is your problem it will cause your calipers to hold pressure and not relese. A way to buy pass it so you can still drive with out casuing damage to the system is to just SLIGHTLY crack open a brake line to the propotioning valve and let some air into the system so they can lock up completely.