How much will it cost??? need your help

**NUGZ** · 02-28-2009, 10:34 PM

how much will it cost to have my rs*r springs and my kyb's installed on my teggy and wheres the best place to have it done thanks

**ranger250x** · 02-28-2009, 11:23 PM

shouldnt cost you anything if you do it right

**Barefoot** · 03-01-2009, 09:56 AM

have yall forgot about this

NO SOLICITATION OF LABOR

**dorin48** · 03-01-2009, 10:30 AM

Shops charge $400 give or take a little, like stated above. Solicitation of labor pwn./\ lol

**Tech5** · 03-01-2009, 10:40 AM

Originally Posted by dorin48

Shops charge $400 give or take a little, like stated above. Solicitation of labor pwn./\ lol

OMG your way off most shops charge 250 tops if they do go else where

Brian* · 03-01-2009, 11:36 AM

Do it yourself!! Its way to easy... I did my first set when I was 16, might as well learn so you know how

**NUGZ** · 03-01-2009, 01:01 PM

i know how to do it i just dont have time right now, rip Jeremy Lusk . I use to ride with them when i lived in so cal

Originally Posted by Brian*

Do it yourself!! Its way to easy... I did my first set when I was 16, might as well learn so you know how

**Elbow** · 03-01-2009, 01:58 PM

Yeah do it yourself...

**Humphrizzle** · 03-01-2009, 02:01 PM

very easy.. it seems like you need to re write your schedule if you dont have 2 spare hours in your day.

**EmminoDaGreat** · 03-01-2009, 02:02 PM

lol at saying shops charge $400... i think we charge 220$.

**NUGZ** · 03-01-2009, 02:56 PM

check pm's

**Vteckidd** · 03-02-2009, 08:10 AM

DO NOT POST OR SOLICIT LABOR UNLESS YOU ARE A SPONSOR

**seanrg1116** · 03-02-2009, 09:45 AM

yea do it in ur drive way (I recommend some PB-Blast) and be careful with ur LCA bolts

**Tech5** · 03-02-2009, 11:07 AM

Originally Posted by seanrg1116

yea do it in ur drive way (I recommend some PB-Blast) and be careful with ur LCA bolts

Yes sir you said it right!!!

**Mr Egg Rollllll** · 03-02-2009, 11:10 AM

DIY - I've knocked out EG/DC's in no time. Really easy to work on.

**The BUCKY** · 03-02-2009, 11:39 AM

if your in the gwinnett area i can knock it out in a couple hrs for $100

**VickNotic** · 03-02-2009, 02:18 PM

i could use the job!! 8D I sure can use the $$$$ i'll come to you!!!!

Thread: How much will it cost??? need your help