A quick paint job I can do myself

[nismo1987]

Oh ok IA Just got a accord and paint job is not so hot rite now...... Its primer a light gray and dark gray and black on front end.... I wanna redo it myself... and I wanna go wit deep dark blue..... I had plan on doing it wit spray cans.... (I know it sound cheap but am a student ballin on a budget)... I been told since am going wit a dark blue I would need to go wit black primer... and I was thinkin since the car is two tone I would need to just over the whole car wit a black primer before I paint it.... But should I resand it than primer it again or could I just go on head primer it as it sits... Somebody let me know whats the best way plz out there its needing alot work asap.... Thanks IA

[Tech5]

GOOGLE is your friend

[nismo1987]

Oh ok thanks for your help I am just lookin to see if anybody has done samething am tryin do on here but thanks again

[X-Runner]

http://easypaintyourcar.com/

[nismo1987]

Thanks

[six7teen]

just wet sand the primer with some 400 grit before you put your paint on!

[FasTech]

(I know it sound cheap but am a student ballin on a budget)

Not sure if you know this, but you're not going to be "ballin" with a rattle can paint job on your car. Sorry, had too quote you on that.



Hope everything turns out good for you though.

[X-Runner]

You do know for under $100 you can get a gallon of real auto paint right?

[frostbyte]

yes resand the car. wet sand it id ur broke, n out of a rattlecan ur not gonna really get a cheap ballin paint job (except the lil ball that makes it rattle). ur not gonna get the shine u think u will have. honestly, if its ur first attempt the primer will prob look better than the paint. if ur wantin it to be present able save for automotive paint, or try sanding it to the point ur happy n let maaco do it for $2oo bux is ur best bet.

[speedminded]

Roll it on. Seriously. For $100.

http://www.hotrod.com/techarticles/b...job/index.html


Click image for more pics:

[nismo1987]

Has anybody every try this rolling it on.... And how did it come out.......

[egibbs123]

can buy a cheap spray gun at walmart for $20...

[green91]

Rolling works fine if you prep the car properly, apply the paint evenly and then wet sand it back smooth.

[1NonlyAccord]

i painted my car for about $150.turned out very well IMO and others for a hour or 2 of work.

Just head to Finishmasters**AutoColor** in lawrenceville or chamblee tucker off 85.
have them Mix up the paint for ya for prolly $70ish per quart and then get a gallon of clear with harnder for $60ish depending on company *my SMART clear was 66 and some change$

if the car is primerd,you need to either sand it with 320g and go back over it with 600g..or like somebody said wetsand it with probably 600g also.

then just go to town..I have a DIY on here from when i did mine.

edit: found it
DIY:Paint car for cheap-show car results

[Elbow]

Roll it on for $30, I did.

[nismo1987]

So how long did it take you to do it?????

Roll it on for $30, I did.

[nismo1987]

Hey mane you car looks good.... What color blue you went wit there... And also how long did that take you???

i painted my car for about $150.turned out very well IMO and others for a hour or 2 of work.

Just head to Finishmasters**AutoColor** in lawrenceville or chamblee tucker off 85.
have them Mix up the paint for ya for prolly $70ish per quart and then get a gallon of clear with harnder for $60ish depending on company *my SMART clear was 66 and some change$

if the car is primerd,you need to either sand it with 320g and go back over it with 600g..or like somebody said wetsand it with probably 600g also.

then just go to town..I have a DIY on here from when i did mine.

edit: found it
DIY:Paint car for cheap-show car results

[X-Runner]

Cost me $120 for all the stuff needed to spray this truck but the compressor.

[1NonlyAccord]

its called lamans blue met *sp?*..its a BMW color code.
it took me only an hour and a half to spray it..but took me some time to buff it.wetsanded it by hand. if you use a DA itl only take another hr also.

[Revmaynard]

Cost me $120 for all the stuff needed to spray this truck but the compressor.

I think you got a little over-spray on the tire. lol

[quickdodge®]

i painted my car for about $150.turned out very well IMO and others for a hour or 2 of work.

You're not a very good example to use. Later, QD.

[AnthonyF]

Roll it on for $30, I did.

You serious? DAYUM. Looks fuking hawt.

-Ant.

[X-Runner]

I think you got a little over-spray on the tire. lol

The wind blew my cover off the tire. Painting outside FTL!

[speedminded]

The wind blew my cover off the tire. Painting outside FTL!

Just lightly dust them with satin/semi-flat black paint from a rattle can!

[nismo1987]

Oh ok then.... Hey thanks 1Nonlyaccord for the DIY it was alot of help and your car turn out great mane....... I'll most likely go off of what you did.... But the rolling on I really don't know what much bout that..... I would really have to do that on a project car to see how it turns it out first..... But all you guys were a big help and thanks again.....

[X-Runner]

Just lightly dust them with satin/semi-flat black paint from a rattle can!

Haha its been long enough its worn off now.