How do i replace a Lower ball joint

[j0nbunklah0m]

need to replace my lower balljoint for my 92 civic. Yes i did search, but im wondering if anyone can give me some tips/pointers

[JDM onlyy]

I think it has to be pressed in, I may be mistaking though. Lol

[Tech5]

I think it has to be pressed in, I may be mistaking though. Lol

Correct.. You can rent a ball joint tool kit at the Autozone for 90 bucks use it and then take it back!

Works great!

[chameleon30038]

Correct.. You can rent a ball joint tool kit at the Autozone for 90 bucks use it and then take it back!

Works great!

Answers right here!!!!

[JKOBD]

Yes it is pressed in. If you don't have the tools, you can take the knuckle assembly to Napa and they will press them in/out. Most Napa's have this ability.

[im_hung]

to get them out use a air hammer with a pointed end. you want to aim and the joint(near center) they should come out real easy. ive replaced alot of bj's at honda...

or

you can get technical

http://www.zshare.net/image/557442715edac3a0/

[dorin48]

Another common option is to pull the knuckle off the car and then use a mallet instead of a press. Just need to be careful not to damage anything while your wanging on it.

[j0nbunklah0m]

thanks for the replies. repped