this is for a 90 acura integra ls no abs 5spd :so i needed a passenger axle and i went to advance and the axle i had didnt match with the one they had, the grooves on the spine going towards the tranny on the old axle has a full spine and the advance auto only had half of a spine but everything else seems too look ok, so i matched it up with a driver side axle, and the looked identical ,so i bought the driveer side, the problem is when i was done putting it in and took it for a drive it dont want to make a full turn ...also i replaced my cable ls tranny with a 92-93 integra ys1 cable tranny(gsr,b16), im not sure if they have identical axles, and i know the driver side axle and passenger axle has to be differnet. and i jacked my car up and let the wheels spin freely to see if it was my tranny but it passed.. so my question is was the advance passenger axle the right one ?(jus a newer spine look) or is the a difference ls vs. gsr/b16 axles?, or did i go wrong somewhere when putting in the ys1 tranny? thanks ia i know its kinda confusing