found the problem I had 0 compression. The timing belt slipped and put my timing like 90 degress off. but I missed all the valves so im good and it running again
damn hondas
found the problem I had 0 compression. The timing belt slipped and put my timing like 90 degress off. but I missed all the valves so im good and it running again
Last edited by seanrg1116; 01-31-2009 at 07:59 AM.
TOO BIG
check your firing order
its right checked it more than once, I never removed the spark plug wires
TOO BIG
make sure everything is plugged in, and make sure the dizzy is put back together right.
The server is too busy at the moment. Please try again later.
did you make sure its not 180 out of rotation?
^^^^^^ yea tryed it both ways but it still wont start
(thighs) I didnt take the dizzy apart just off the head
TOO BIG
That happened to me before. I put the dizzy back together but it was off by 180 and i cranked the engine causing the timing to be completely off, so I had to redo the timing belt. hope this help
Posting Permissions
Reply With Quote
