Results 1 to 6 of 6

Thread: Auto To Manual Swap wire questions EG/EJ Civic

  1. #1
    ^^Idiot with a car key ;) jmmx258's Avatar
    Join Date
    Jan 2007
    Location
    Ohio asshole.
    Age
    41
    Posts
    1,972
    Rep Power
    20

    Default Auto To Manual Swap wire questions EG/EJ Civic

    I'm doin a B swap in an EJ civic.

    It was also previously an automatic. I've already tackled the transmission mount issue.

    My next issue is the car is boosted and has Full Throttle Shift, and Launch Control.

    What I want to knjow is what wires under the center console do I have to run up to the clutch pedal to make it work. I know the OE wires from a standard ar black and blue/black stripe. There's a blank plug, which is yellow too, that goes into nothing on the side of the underdash fuse box. Is that possibly what I need to plug into the button on the clutch pedal assembly?

    Or, again, which 2 wires do I have to run from the center console to the pedal assembly?

    Thanks, reps given for help. Car has to be done tonight so any good info is greatly appreciated.

  2. #2
    Accord->Evo EmminoDaGreat's Avatar
    Join Date
    Aug 2005
    Location
    Hiram
    Age
    41
    Posts
    10,412
    Rep Power
    33

    Default

    wire full throttle switch into the clutch safety switch, or cruise control switch on the pedal.... and then the other stuff in the center console, you wire together so it will start and the others you run to the ecu to make reverse lights work...

    The EMPIRE

  3. #3
    ^^Idiot with a car key ;) jmmx258's Avatar
    Join Date
    Jan 2007
    Location
    Ohio asshole.
    Age
    41
    Posts
    1,972
    Rep Power
    20

    Default

    I dont really understand what your saying exactly.

    Basically, what I need to know is what wires do I have to hook up to make it so I Have to push the clutch to start it.

    My ecu was set to have full throttle and launch while tuning. So, there's no full throttle switch.

  4. #4
    ^^Idiot with a car key ;) jmmx258's Avatar
    Join Date
    Jan 2007
    Location
    Ohio asshole.
    Age
    41
    Posts
    1,972
    Rep Power
    20

    Default

    NVM After I got fed up with google I posted here. Low and behold, I just found it via google. Thanks reguardless, reps

  5. #5
    Accord->Evo EmminoDaGreat's Avatar
    Join Date
    Aug 2005
    Location
    Hiram
    Age
    41
    Posts
    10,412
    Rep Power
    33

    Default

    You need to have something to activate full throttle, IE a switch, I have done it many a time, and I have full throttle shift on my personal car... It has to know whats going on...

    You have to wire the clutch saftey switch wires into the ecu.

    The EMPIRE

  6. #6
    ^^Idiot with a car key ;) jmmx258's Avatar
    Join Date
    Jan 2007
    Location
    Ohio asshole.
    Age
    41
    Posts
    1,972
    Rep Power
    20

    Default

    THats what I was asking how to do.

    I found out in the 14 wire plug, there's two heavier guage wires, those are the ones I need to wire to the clutch switch.

    As in, from left to right on the plug its
    14 13 12 11 10 9 8
    7 6 5 4 3 2 1

    Wire 11 and 12 to the clutch switch.

    Thanks, I'd show ya some rep, but I have to spread first.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!