b series speed sensor

[Tensa_Zanget]

yeah, that tab seems to break, when you tighten that 10mm too much. happened to me once. i barely turned it with a 3/8" ratchet, and it wanted to break on me. so now i hand tighten it, then give it a slight tug using 1/4" tools. anyway on to the suggestion of fixing it.

unless you can fab up something, and do your own aluminum welding, i don't see a way on repairing it. VSS usually goes for $40-$60. cable is on the cheaper side of the price range.

yea im plannng to get a cable speed sensor anyways cus my tranny is a cable. bought the tranny for my swap. so you know where i can get it for cheap or no other choice but dealer?

[b17a1db2]

yea im plannng to get a cable speed sensor anyways cus my tranny is a cable. bought the tranny for my swap. so you know where i can get it for cheap or no other choice but dealer?

i wouldn't go to the dealer for that part. since it's cable driven, for the one you need. any from a 88-91 civic/crx will work, i know on manual transmissions definitely, or 90-93 integra's also. but i'd say a decent price for one, that i'd pay for if i needed one. is around 40 dollars, 50 tops, if you're desperate for one. but i like to find them for $30 or less.

[Tensa_Zanget]

i wouldn't go to the dealer for that part. since it's cable driven, for the one you need. any from a 88-91 civic/crx will work, i know on manual transmissions definitely, or 90-93 integra's also. but i'd say a decent price for one, that i'd pay for if i needed one. is around 40 dollars, 50 tops, if you're desperate for one. but i like to find them for $30 or less.

hehe 30-50 is considered cheap? kidding me lol. well as u mention about the 88-91 crx vss how will those work? its a d series. And ironically this tranny is for my crx goin into a b20 swap.

[b17a1db2]

hehe 30-50 is considered cheap? kidding me lol. well as u mention about the 88-91 crx vss how will those work? its a d series. And ironically this tranny is for my crx goin into a b20 swap.

yeah, 30 is cheap. hahahaa. is that too expensive? lol. and yes, the 88-91 civic/crx vss will work fine, it bolts right in. looks different than the 90-93 integra ones. but i've seen that it works.

[Tensa_Zanget]

yeah, 30 is cheap. hahahaa. is that too expensive? lol. and yes, the 88-91 civic/crx vss will work fine, it bolts right in. looks different than the 90-93 integra ones. but i've seen that it works.

Hell yea lol 30 is pretty expensive for just a damn sensor! So yea imma take your word for it about the 88-91 crx speed sensor. Guess imma use the speed sensor from my crx and plug it onto my b16 tranny and if it dosent work imma hunt u down jk

[b17a1db2]

hahaa.. yeah, it should work. i've never done it personally, but i've heard it does work. i've seen it used in a b-series cable transmission. hooked up. drove the car also. and seen it work.. so i'd say it works...

Hell yea lol 30 is pretty expensive for just a damn sensor! So yea imma take your word for it about the 88-91 crx speed sensor. Guess imma use the speed sensor from my crx and plug it onto my b16 tranny and if it dosent work imma hunt u down jk