Results 1 to 4 of 4

Thread: Need help Redtop SR

  1. #1
    aspiring racer
    Join Date
    Aug 2005
    Location
    Le Grand, Ia
    Age
    39
    Posts
    62
    Rep Power
    0

    Default Need help Redtop SR

    got a redtop sr had fuel, know I don't, no fire, but will turn over

    jumped fuel pump relay and started work know not

    reattached missing ground for coil packs, to the fire wall or back of cylinder head?

    wiring may be fubarred need ecu and igniter pin outs helpful or full chassis fsm viewable would be nice

  2. #2
    Bender A. Rodriguez
    Join Date
    Mar 2005
    Location
    Macon
    Age
    45
    Posts
    1,678
    Rep Power
    22

    Default

    So was there a question in there somewhere? You need to step back, assemble cohesive thoughts, and then write them in a manner that can be at least understood as an attempt at a sentence. So far you've given no real information for us to go by.
    Ryan Reynolds


    "So long and thanks for all the fish"

  3. #3
    aspiring racer
    Join Date
    Aug 2005
    Location
    Le Grand, Ia
    Age
    39
    Posts
    62
    Rep Power
    0

    Default

    the car turns over just fine but makes no attempt at running

    at first the fuel pump was not getting power, then I hot wired the relay and it started working, After a few days it stopped running again. any thoughts?

    the car originally had spark but after rigging the fuel relay it does not, noticed that the ground for the coil packs was loose, can't remember if they went to the fire wall or to the back of the head, put on back of head still nothing

    the wiring harness was rewired after first motor, and now seems may be an issue, the body harness connector has two wires I believe that are supposed to be attached but are cut right at the harness. a ground and a tach signal wire

    any help would be appreciated

  4. #4
    Mr. JDM
    Join Date
    Oct 2005
    Location
    Atlanta GA
    Age
    42
    Posts
    159
    Rep Power
    20

    Default

    ok Check the pump make sure you have not fried it first. Second dose you tach work when it was running? If is a walbro i had to replace one twice it just went bad just like that they sent me a new one thought but it was a pain

    img]http://www.nicoclub.com/banners/Z1.gif[/img]
    http://www.z1motorsports.com
    2877 Carrollton - Villa Rica Hwy
    Carrollton, GA 30116
    770-832-7457
    [email protected]
    AIM:seanbz1

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!