The ecu fuse is good and also checked power at the fuse. Even double checked the ground on the thermostat. I pulled the cover on the ecu and checked for power and had power going in but when i cranked it had no power from ecu to injectors. I had a feeling it was the ecu but wasnt sure. normally you have solid led and cel. The other i went to crank it and the main relay was buzzing so i swapped it with 3 others and even swapped the distributor it sterted and ran then this morning it was just turn over so i was going to pull codes and seen there was no lit led on computer and ended up with more work then i wanted.