Results 1 to 13 of 13

Thread: Any0ne kn0 about this?

  1. #1
    Certified Gearhead jdmda9's Avatar
    Join Date
    Nov 2007
    Location
    Atlanta
    Posts
    855
    Rep Power
    18

    Default Any0ne kn0 about this?

    So i have a 91 DA teg and i recently swapped a b17a1 gsr in it. The problem is that the car idles like at 2k and idk what it could be. I replaced the sensor on the back of the mani but still nothing changes. Anyone kno what the deal is? lmk...thanx!

  2. #2
    is better than you..
    Join Date
    Jul 2005
    Location
    Somewhere you're not
    Age
    36
    Posts
    3,108
    Rep Power
    24

    Default

    vac leak?

  3. #3
    Certified Gearhead jdmda9's Avatar
    Join Date
    Nov 2007
    Location
    Atlanta
    Posts
    855
    Rep Power
    18

    Default

    well the shell has some vaccumes that are made for the old ls mani. but not all of these vaccumes are used up by the gsr mani. i guess cause the car is 0bd0 and the motor is obd1? anyone kno how i can fix this?

  4. #4
    Don Mon SiRed94's Avatar
    Join Date
    Feb 2006
    Location
    Morrow 30260
    Posts
    3,323
    Rep Power
    25

    Default

    probably a small vacuum leak, or either the throttle cable may be too tight...


  5. #5
    Certified Gearhead jdmda9's Avatar
    Join Date
    Nov 2007
    Location
    Atlanta
    Posts
    855
    Rep Power
    18

    Default

    it may be a vaccum leak. cause i tried everything already. like loosening the throttle cable, retarding the distributor and lowering the rev by messing around with the screw located on the throttle body...any one kno how i can make all the vaccumes work?
    Quote Originally Posted by SiRed94
    probably a small vacuum leak, or either the throttle cable may be too tight...

  6. #6
    Yum-Yum Racing
    Join Date
    Nov 2006
    Location
    Lawrenceville
    Age
    38
    Posts
    1,292
    Rep Power
    20

    Default

    check to see the throttle cable could be too tight or a vacuum leak does it hesitate when you pressthe gas or is it a really goodresponse?


  7. #7
    Certified Gearhead
    Join Date
    Jan 2008
    Age
    42
    Posts
    707
    Rep Power
    18

    Default

    get carburetor spray and spray all around IM when engine is started up, while spraying carburetor, see if the motor chokes, if it does then your IM casket needs to be changed or your throttle body casket, or clean out your iacv valve.

  8. #8
    Certified Gearhead jdmda9's Avatar
    Join Date
    Nov 2007
    Location
    Atlanta
    Posts
    855
    Rep Power
    18

    Default

    it gives a pretty good response but i kno it can be way better than how it is now...but even if the cable is tight or loose it still idles high...
    Quote Originally Posted by Innocent-s13
    check to see the throttle cable could be too tight or a vacuum leak does it hesitate when you pressthe gas or is it a really goodresponse?

  9. #9
    Certified Gearhead jdmda9's Avatar
    Join Date
    Nov 2007
    Location
    Atlanta
    Posts
    855
    Rep Power
    18

    Default

    thats not a bad idea...ill try that along with some other things aswell. cause i hate being at a light and my car is the loudest one...lol!
    Quote Originally Posted by Uptown401
    get carburetor spray and spray all around IM when engine is started up, while spraying carburetor, see if the motor chokes, if it does then your IM casket needs to be changed or your throttle body casket, or clean out your iacv valve.

  10. #10
    Boosted B17 !!!!!!!! 1SOL2NV's Avatar
    Join Date
    Aug 2006
    Location
    Augusta Ga
    Age
    39
    Posts
    3,563
    Rep Power
    24

    Default

    my b17a1 worked fine with stock manifold in my del sol . wut ecu are you running ? the p61 ?

    93 sol Si
    95 sol S
    95 sol Si

  11. #11
    Senior Member G.C's Avatar
    Join Date
    Aug 2007
    Location
    Forgot
    Age
    35
    Posts
    4,781
    Rep Power
    25

    Default

    Check for vacuum leaks. Trace all your hoses see if any are cracked/broken or just hanging. Does the idle stay at 2k? or it bounces up an down.
    :idb:

  12. #12
    Certified Gearhead jdmda9's Avatar
    Join Date
    Nov 2007
    Location
    Atlanta
    Posts
    855
    Rep Power
    18

    Default

    na im running a chipped 0bd0 pr3...what mani do you have? the stock one that came off the b17s?
    Quote Originally Posted by 1SOL2NV
    my b17a1 worked fine with stock manifold in my del sol . wut ecu are you running ? the p61 ?
    shhh...

    vtec game scArY. . !

  13. #13
    Certified Gearhead jdmda9's Avatar
    Join Date
    Nov 2007
    Location
    Atlanta
    Posts
    855
    Rep Power
    18

    Default

    it stays at 2k..
    Quote Originally Posted by G.C
    Check for vacuum leaks. Trace all your hoses see if any are cracked/broken or just hanging. Does the idle stay at 2k? or it bounces up an down.
    shhh...

    vtec game scArY. . !

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!