b16a2 into EG chassis question

[slostang]

I'd use an obd1 b16 wiring harness, injectors, alternator, dizzy, and ecu.

[BTEC]

I'd use an obd1 b16 wiring harness, injectors, alternator, dizzy, and ecu.

yeah, me 2. lol!! especially if ur not good with wiring diagrams/electrical stuff.

[slostang]

yeah, me 2. lol!! especially if ur not good with wiring diagrams/electrical stuff.

IIRC if you use those obd1 components I listed you don't have to cut any wires really. should be "plug and play". I guess that term applies here. lol

[BTEC]

IIRC if you use those obd1 components I listed you don't have to cut any wires really. should be "plug and play". I guess that term applies here. lol

pretty much. lol.

[b16EG-HaTcH]

I'd use an obd1 b16 wiring harness, injectors, alternator, dizzy, and ecu.

find them for me and i will. i have also been told on clubeg6 that i could use and obd2 GSR harness and it would plug into the shock tower plugs and the motor. i have searched for all that stuff with no luck and i would wind up paying more for all that stuff than i did for the whole swap, and w/ a baby on the way spending a whole lot of $$$ is out of the question.

[BTEC]

find them for me and i will. i have also been told on clubeg6 that i could use and obd2 GSR harness and it would plug into the shock tower plugs and the motor. i have searched for all that stuff with no luck and i would wind up paying more for all that stuff than i did for the whole swap, and w/ a baby on the way spending a whole lot of $$$ is out of the question.

obd2 gsr harness means its wired for the external (outside the dizzy and on the oil pump) crank sensor. which means ud still have to do some pin swapping or wire jumping at the ecu.

[slostang]

find them for me and i will. i have also been told on clubeg6 that i could use and obd2 GSR harness and it would plug into the shock tower plugs and the motor. i have searched for all that stuff with no luck and i would wind up paying more for all that stuff than i did for the whole swap, and w/ a baby on the way spending a whole lot of $$$ is out of the question.

I thought you could use the obd1 harness from the eg delsol with the b16a3?

[b16EG-HaTcH]

I thought you could use the obd1 harness from the eg delsol with the b16a3?

you probably could but unless you have one i had no luck finding one of those either.

[BTEC]

you probably could but unless you have one i had no luck finding one of those either.

make some wtb threads and see what kinda prices you get. or have u done that already?

[b16EG-HaTcH]

make some wtb threads and see what kinda prices you get. or have u done that already?

LoL
yeah like twice in the last 3 months......and w/ no luck. thats the reason i just decided to go this route b/c i have almost everything i need to do it.

[BTEC]

LoL
yeah like twice in the last 3 months......and w/ no luck. thats the reason i just decided to go this route b/c i have almost everything i need to do it.

gotcha. well look around on honda tech bc they have good "how to" threads if u can find em. Search b4 u make a thread asking bc they can be some BIG A-holes on that site.

[slostang]

you probably could but unless you have one i had no luck finding one of those either.

damn. didn't thin b16 parts were that hard to find. pm jayL he did an LS swap to his eg delsol a while back. he can prolly give you better advice.