Yea take a bucket of water, a grey scotch pad and do it while it is wet. And if you want get some PPG scuffing paste too, to quicken the process. and then wash the car down with some dish washing soap, let it dry tape off and re-clear if you didn't go through the base.


BUt from looking at that texture, it looks as if you can feel it too. If so you might want to wet sand with 1k and then spray the clear. Don't bear down too hard and go through the base either, because I'm assuming your running low on the blue.

Some will tell you to just scotch pad it, but the texture will still be there, and when you re-clear it you wont feel it but the clear will maginify the texture so it will look as if it is orange-peeled/dry sprayed.

Good luck.