want to blow my horn

[LSblaze]

Can anyone tell me how to keep my horn after you hook up an aftermarket steering wheel?

[FasTech]

Just find a nice aftermarket steering wheel with a horn.... I know Mugen has a few with horn inserts.

[SixSquared]

You don't even have to find a "nice" steering wheel... you can get a Grant GT for $60 from Summit and it comes with a horn kit. What steering wheel are you getting?

Or you could always opt for the "horn broke, watch for finger" sticker...

[LSblaze]

The steering wheel I have has the button for the horn but when I removed the factory wheel the wire for the horn is no longer there. I guess what I am asking is how do I connect the horn wire to the aftermarket wheel.

[SixSquared]

What car is it? You may have to seperate the airbag and steering wheel to get to the wire and pressure plate for the horn.

[southside]

MoMO FTW

[LSblaze]

It's a 94 civic ex

What car is it? You may have to seperate the airbag and steering wheel to get to the wire and pressure plate for the horn.

[Barefoot]

MoMO FTW

i wouldnt go that far

[SixSquared]

It's a 94 civic ex

You'll need either a t40 or t50 (I wanna say t50) torx security bit to remove the airbag from the wheel. Or you can drill em out. I would recommend investing in the proper tools. When you pull the airbag out, the wire and pressure plate are behind it.

[PSYCO G]

why don't you just hook it up to a "push button" somewhere?....

[SixSquared]

^^Why rig it when you can do it correctly?

[LSblaze]

You'll need either a t40 or t50 (I wanna say t50) torx security bit to remove the airbag from the wheel. Or you can drill em out. I would recommend investing in the proper tools. When you pull the airbag out, the wire and pressure plate are behind it.

What about that ribbon( flat ) harness that's connected behind the factory wheel do I need to cut that off? and if so how would I keep the horn wire from getting twisted when I connect it to the aftermarket wheel.