OBD-0 to OBD-1 Conversion.

[JDMirza]

So far I just got the jumper harness and I am getting a LS P75(obd-1), what else would I need ... my homeboy said that I can use a OBD-O distributor, is that true ?

Reps will be awarded.

[suprapower]

Yes. that, ECU,4 wire heated O2 sensor . There is also Some optional stuff you can do to it if you wanted to like injectors and injector clips

[JDMirza]

I was thinking about going with some H22 injectors.

[JDMirza]

Yes. that, ECU,4 wire heated O2 sensor . There is also Some optional stuff you can do to it if you wanted to like injectors and injector clips

Tell me something, I don't have to replace the hole intake manifold and put on like a obd-1 ls intake manifold ?

[suprapower]

go here. got some good info on it
http://www.g2ic.com/forums/showthread.php?t=86612

[suprapower]

no you dont have to change out the manifold. what motor you got?

[JDMirza]

b20b, and thanks for the site.

[JDMirza]

O2 sensor is optional though, rite ?

[suprapower]

no problem man. yes

[scttydb411]

obd1 dizzy
obd0-1 conversion harness
4 wire o2 (optional)
obd1 ecu (chipped and tuned best)

[JDMirza]

obd1 dizzy
obd0-1 conversion harness
4 wire o2 (optional)
obd1 ecu (chipped and tuned best)

Good looking out man.

[southside]

You cant use obd0 ecu,or at least I dont think you can.Listen to scttydb411

[DecoyOctopus]

mirza if you really wanna go fast ill sell you my obd5 ecu and i got a intake manifold from a type r honda odessy that you can use. muwhahahahahahaha oh yea i got spark plugs for a 99 crv hopefully they are the same thread pattern as your JDM TYTE B2O head

[JDMirza]

mirza if you really wanna go fast ill sell you my obd5 ecu and i got a intake manifold from a type r honda odessy that you can use. muwhahahahahahaha oh yea i got spark plugs for a 99 crv hopefully they are the same thread pattern as your JDM TYTE B2O head

Lmfao! Hahah. reps.

[suprapower]

so how did it go?

[jdmda9]

x2..i agree with him. you can use your 0bd0 distributor. the only thing is that your going to have to cut one of your three brackets that are meant to hold down the distributor. the ones that make the shape of a triangle...

obd1 dizzy
obd0-1 conversion harness
4 wire o2 (optional)
obd1 ecu (chipped and tuned best)

[southside]

x2..i agree with him. you can use your 0bd0 distributor. the only thing is that your going to have to cut one of your three brackets that are meant to hold down the distributor. the ones that make the shape of a triangle...

Ugh he didnt say you could use obd0 dizzy he said get a obd1 dizzy

[JDMirza]

so how did it go?

I'm waiting to get all the parts, my goal is to build a reliable B20vtec, because I'm going with a GSR Head.